20 Most Recent Brother MFC-5440CN All-In-One InkJet Printer - Page 2 Questions & Answers

You probably mean Control Center 2. I do not know where to find it but Control Center 3 is available on the Brother Solutions Center website.Here is the linkhttp://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?reg=us&c=us&lang=en&prod=mfc5440cn_allSelect the OS, the language and click Search button

I got the error 51 once and it turned out the connector to the ink holder was loose so i put it in and error gone.If this not help you need clean the encoder strip.

Unplug the printer from power cord.Press and hold the "menu" button, then plug the device.You'll see on the LCD screen a "machine error" code.If this code is 40,41 or 4F the print head is defective.If the error is 50 or 51 there is error in Purge unit and printer require service.If the error is 46 the waste ink tank is full.Follow this:
Enter 80, then scroll down with the arrow down (round) key. You'll find an entry listed as purge count. If number
is over 6000, enter 2 7 8 3.This will reset the purge count value. Then restart the printer, hopefully without the
annoying cannot clean message.

the porous pad in your printer need to be replaced and the ink counter need to be reset... you will need to go into the service mode to reset the waste ink counter

Sounds like the printhead is pretty severely dried. As standard cleaning cycles haven't helped I would recommend picking up some LC900 cleaning cartridges from eBay etc. These are cartridges filled/partially filled with cartridge flush and break down ink inside the printer. Most of them contain a mix of ink and flush and you can carry on printing as usual. Given the severity of the dried/blocked printhead you have I would recommend just running cleaning cycles, but leave 10 minutes or so between cleans to avoid overheating the printhead.

If you lift the scanner and then carfully remove the cover that is on the same side as the ink cartridges the box should bein the back and you can remove it and clean it and let it dry for a while then reinstall it. if you need more help just do a live chat request for ME and i will help you

You can dowload it here.Source: Printer Clinic

Toto the brother website and put on the product number and request an instruction manual and that should solve your problem

Is it a fax you received? Well, if so, open it using Scansoft Pageviewer. Unfold the File menu and look for the submenu print. Send the page to the printer or open the configuration panel of your printer and set the number of copies to 2 or any other number of your choosing.If you do not have the MFL Pro Software Suite that relates to your printer, download it from Brother Solution Center. Choose the version that is specific to your OS. As to the Scansoft PaperPort software, it is not available in the download and you will have to use the Disk that shipped with your printer.Another pedestrian way to solve the `problem` is to print the fax once, then feed the copy just made to the copier. Your MFC is able to copy documents.

Is it a fax you received? Well, if so, open it using Scansoft Pageviewer. Unfold the File menu and look for the submenu print. Send the page to the printer or open the configuration panel of your printer and set the number of copies to 2 or any other number of your choosing.If you do not have the MFL Pro Software Suite that relates to your printer, download it from Brother Solution Center. Choose the version that is specific to your OS. As to the Scansoft PaperPort software, it is not available in the download and you will have to use the Disk that shipped with your printer.

Inkjet printers need to be used frequently to prevent inkdrying out and blocking the print head nozzles.If the print head cleaning maintenance routine does not clear the blockages,then print head needs replacing, but it may be expensive.It may be more cost effective to buy a later model and better printer thanreplace the print head.