20 Most Recent
Brother MFC-5440CN All-In-One InkJet Printer - Page 3 Questions & Answers
Need software for pinter
Hi Otis,You can download the driver from the brother solutions center by clicking
here.All you have to do is select the driver that corresponds with your operating system.Hope this helps.Thanks!
10/31/2011 9:59:00 PM •
Brother...
•
Answered
on Oct 31, 2011
Hi I have a trouble
Hi! It seems the purge counter has reached its limit, to reset it follow these steps:
- Press "Menu" and then press *2864 in quick succession ("maint" should displayed and all the lights on the printer should be flashing).
- Press 80 then keep pressing the black/mono start button until "purge count" is displayed.
- Press 2783 to reset the purge count.
- press the stop/exit key.
- press 99.
- The printer should return to normal.
You should also purchase a new ink absorber for the printer and install it as soon as possible, it can function like this but requires a replacement.
10/10/2011 10:05:28 PM •
Brother...
•
Answered
on Oct 10, 2011
HEllo, i get a Unable to Clean error on my
Hi you can try
This works with most Brother printers
Procedure how to reset the error 46 error (unable to clean). This can be done on every Brother inkjet machine with a numeric keypad.
- Machine off
- Switch on the machine while holding down the “menu” button until all the leds are flashing on/off. Now you are in “maintenance” mode.
- press 80
- press the “mono start” button several times until you see “purge: xxxx”
- press “2783” in order to reset the purge counter. You will see: “purge:0000”
- press “99” to exit the maintenance mode
Now you are able to print again, but actually your ink absorber box is now full with ink. Ink flooding can happen if you don’t replace this ink box
Also can try.
Reset code.
Press menu then*2864 within 2 seconds (maint should be on the display and all the lights should be flashing, if not try again) press 80
then keep pressing black/mono start button until screen displays ‘purge count’
press 2783 to reset purge count
press stop/exit key
press 99
machine should return to normal
All I ask is come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
9/23/2011 6:08:04 AM •
Brother...
•
Answered
on Sep 23, 2011
Print only black and white for brother mfc 3360c
Power off the printer.press menu and power on .do'nt release menu button until maintenance appear and flashes fax, scan and copy . type 10 . then next type 49. you will see 00000000.just change last 0 to 1. 00000001. press 99 to exit. you will find the printer only prints B/W only.
9/15/2011 7:12:13 AM •
Brother...
•
Answered
on Sep 15, 2011
Hi I have a brother
Where does the Error message appear? is it on the printer or the PC.
Try a test print from the printer menu
Press Ink
Press up or down to select 'Test Print'
Press up or down to select 'Alignment
Press menu/set
press black start or colour start
The printer should start printing. If this prints ok then the problem is likely to be with the comms between the printer and workstation
9/2/2011 6:52:52 PM •
Brother...
•
Answered
on Sep 02, 2011
I have ajusted every thing
Hi there.
Can you tell me about the CD ROM? DO you need to reinstall the installer?
Thank you!
9/1/2011 5:55:18 AM •
Brother...
•
Answered
on Sep 01, 2011
I want to download printer
You can go to the Brother website and from their you can download the appropriate drivers for your printer.
8/17/2011 7:53:49 PM •
Brother...
•
Answered
on Aug 17, 2011
I picked up my printer
Hello, for this type of printer, if the printer says the cartridges are empty, you are forced to replace them otherwise, the printer will not print. Go ahead and change the cartridges anyway even though you do not think they are empty. Even if you can see some ink in the cartridges, they are likely empty.
Thanks for using FixYa!
8/8/2011 8:24:56 PM •
Brother...
•
Answered
on Aug 08, 2011
Not finding what you are looking for?