20 Most Recent
Big Button TV Universal Remote - Page 9 Questions & Answers
Need codes for giant remote for Magnavox TV
TRY 004, 008, 009, 062, 068, 069, 074,075,077, 089, 163 or 165
Pxrc1
i have the same problem i need
Toshiba TV
and ELECTROHOME DVD thanks so much
Pro team remote control
1. Press and hold SET button and press and hold device key at the same time, when l.e.d. lights release both keys.
2. Enter the code for your device.
3. Press power on the remote
If device can be controlled then code has worked if not try another code.
4.Press any device key to quit setting procedure.
Cant get jumbo remote to work for my tv
If it's an Innovage brand jumbo remote, try this...
There are 2 different versions of the Innovage Jumbo remote, an old and a new.
For the old version:
1. You have to have the TV or DVD turned OFF.
2. Then, you have to push CODE SEARCH button once for 3 seconds till it lights solid
3.
Then press TV (or DVD) button once till it lights once and turns solid
and press the ON/OFF button very slowly and repeatedly as many as 300+
times to wait for the TV (or DVD) to go on.
4. Once it goes on...STOP and IMMEDIATELY press ENTER before you pass up the code or you'll have to start over!
This
is very frustrating but my advice is to take it slow and methodical.
Think the tortoise and the hare...if you go too fast, you'll redo it
several times because you'll keep passing it up and accidentally turn
the TV on and off suddenly and miss the code.
--------------------------------------------
For the newer version:
1. Turn the TV (or DVD) ON.
2. Press CODE SEARCH once and it blinks.
3. Press TV (or DVD) once and it blinks.
4. Press ON/OFF button only ONCE.
5. Wait as it automatically searches for the code by itself. It will have a slow long blink between each code it searches.
6.
Stay alert because when the TV (or DVD) goes off, you IMMEDIATELY have
to push ENTER to lock in that code before it goes onto the next one.
(which it will even if the TV is off)
Remote codes for Sceptre Flat Screen TV's
I contacted the manufacturer's customer service department, who advised me to return the unit to the vendor. Walgreen's took it back, without a sales receipt, for store credit.
Living Solutions Jumbo Remote
for code retrieval:
press and hold "code search" until led lights up solid red.
press the device button (TV for tv, DVD for dvd player, etc.)
press each of the buttons 0-9 untill the light blinks. that means you have the 1st number of the 3 digit code.
repeat to find the 2nd and 3rd.
After you find the 3rd digit, the led will turn off.
Now you have the code!
So, what you do is:
turn on the device you want to program.
aim the remote and hold code search until light remains solid red
press device button
enter the code, led should turn off
after that, press the on/off key.
Not finding what you are looking for?