20 Most Recent
Universal Remote Control MX-500 LCD Remote Control - Page 4 Questions & Answers
I need code list for av10 universal remote control
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://homenol.blogspot.com/
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
•
Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.//
I need the universal remote
The code for a universal remote, I used a Sky + remote is 1936. Switch tv on and not in standby, press Tv button on remove, press select and red button for 5 secs until you see the IR button flash twice. Enter 1936 code, the IR will flash again twice. Done. Test using remote on/ off button. This works for MATSUI TVR185 TS. If there is a PIN code, reset holding vol - on tv and holding number 7 on remote at same time. You will see a PIN OK message on screen.
Not finding what you are looking for?