Sansui COM312AD 13" TV/VCR Combo - Page 2 - Answered Questions & Fixed issues

1. Check if the picture settings are set properly. Make sure the aspect ratio and resolution are correct for your TV. 2. Check your TV's display menu for any "Flip" or "Mirror" options and turn them off. 3. Check the connections from your TV to your cable box or HDMI device. Try unplugging them and plugging them back in to make sure they are secure. 4. Check the TV's user manual for any specific instructions on troubleshooting picture issues. 5. If none of these steps resolve the issue, contact your TV manufacturer for more help and advice.

Try these steps to fix the issue with your Sansui TV:

• Check connections and source
• Ensure TV is on and power cord plugged in
• Reset the TV by unplugging it and plugging it back in
• Verify audio settings and that speakers are on
• Contact manufacturer for further assistance if needed.

Is the DVD/VCR a single unit? What is the TV you are going into and what are you inputs and outputs? Are they HDMI, VGA, Component?

To connect a VCR/DVD player to a Sansui flat screen TV, you will need to use the appropriate cables and connections. Here are the general steps you can follow:

1. Check your TV and VCR/DVD player for the available ports. The TV should have RCA composite video and audio inputs, and the VCR/DVD player should have RCA composite video and audio outputs, or HDMI port.
2. Using the appropriate cables, connect the RCA composite video and audio outputs from the VCR/DVD player to the corresponding RCA composite video and audio inputs on the TV. If your VCR/DVD player has HDMI port, use HDMI cable to connect the TV and the VCR/DVD player.
3. Turn on your TV and VCR/DVD player.
4. On your TV, press the "Input" or "Source" button to switch to the input where the RCA composite video and audio cables are connected or HDMI.
5. Using the remote of your TV, go to the menu and select the input where the VCR/DVD is connected.
6. If you don't see any picture, try adjusting the settings on your TV and VCR/DVD player.
7. Once you are able to see the picture on your TV, you should be able to use your VCR/DVD player as you normally would.

Reset information https://www.google.com/search?q=forgot+parental+lock+code+for+sansui+hdlcd1955w ..

I would like to enter the highlighted USB app:

The devices or input has not been set up and connected to your TV properly.I would get another remote for your TV from the companies official website that could be the problem not having a remote for your TV.

The most likely reason is that it is not connected to the Internet Router or WiFi. It can't load the Smart Source features without it.

Nothing on buying the Transformer https://www.google.com/search?q=Sansui+SHT-10+Toroidal+transformer The only parts shown are Capacitors https://www.google.com/search?q=sansui+sht-10+parts+diagram ..

• read the SANSUI manual
• ask maker for support?
• why not buy a good remote. ?????

Are your backlights on?

Hi, look on the back of the t.v. for an alternative switch for the power. You know how you can turn on one light from 2 different switches ? Well, this is the same idea but both buttons or switches would be on the tv. Also, please double check that the outlet you're using has power coming through it by testing we another device. Thank you.

Instructions: 1 Turn on the TV and change it to a blocked station or show. The TV will prompt you for the parental control password. 2 Set the volume on the TV to "0." No sound should be coming from the TV speakers. 3 Press the "Vol -" button on the TV. It will not work if you press the volume button on the remote; you must use the volume button on the TV for this step. 4 Point the remote at the TV and hold down the "0" key on the remote. Keep holding both buttons for approximately 10 seconds. The V-Chip will reset, and the password prompt will disappear. https://techlore.com/forum/thread/11883/sansui-password-reset ..

Plug the video lead in.

check input or source

You are right. No manual anywhere. The company closed in 2014. https://www.google.com/search?q=sansui+vc-reis254+manual ..

see if voltage drops when it goes out if so bad power board

You may need the remote to program it

Not sure what your asking

I get all my firmware updates from this site Home Page