Sansui COM312AD 13" TV/VCR Combo - Page 9 - Answered Questions & Fixed issues


Diodes, capacitor or dry joints.

Sansui Televison... | Answered on Sep 03, 2017 | 49 views


Usually a 100/150/220nF capacitor combined with the two damper diodes can cause this fault as can bad connections.

Sansui Televison... | Answered on Sep 03, 2017 | 50 views


So get another one.

Sansui Televison... | Answered on Sep 01, 2017 | 66 views


Fixya does not sell remote controls.

Sansui Televison... | Answered on Sep 01, 2017 | 76 views


Look for and use the reset button on set. Go to web site for location or google it.

Sansui Televison... | Answered on Aug 25, 2017 | 47 views


Press the ADJ (adjustment) button
If it asks for a password, enter 0413
This will take you to the Factory Mode Adjustments menu
Trace Tool Option 5 and enter (In the video its the fourth option)
Go to Mirror Mode and Change the value you see
It doesn't matter which state it is in
if its On change it to Off and vice versa
Switch Off the TV and ON again for the changes to take effect.
That's it the picture will be the right way up.

Sansui Televison... | Answered on Aug 22, 2017 | 430 views


Fixya does not sell replacement power supplies/chargers.

Sansui Televison... | Answered on Aug 15, 2017 | 55 views


I see no question here.

Sansui Televison... | Answered on Jul 28, 2017 | 80 views


No.
If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://homenol.blogspot.com/
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

Sansui Televison... | Answered on Jul 25, 2017 | 44 views


You will need to buy a digital to analog converter box.

Sansui Televison... | Answered on Jul 19, 2017 | 46 views


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://homenol.blogspot.com/
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.

Sansui Televison... | Answered on Jul 18, 2017 | 180 views


Could be an open internal fuse or power supply failure

Sansui Televison... | Answered on Jun 22, 2017 | 33 views


Try Googling (sansui)(COM311AD)(manual) without parens.

Sansui Televison... | Answered on Jun 19, 2017 | 37 views


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Sansui Televison... | Answered on Jun 14, 2017 | 35 views


If you wish to get some details; visit the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
NB: Please read and understand well, the instructions to enter the service mode, before you begin. Be very careful. Note how to "EXIT" the service mode; after entering and adjusting data. This is very important.
Search the site by type in the "brand name" to your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Sansui Televison... | Answered on Jun 09, 2017 | 38 views


If you wish to get some details; visit the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
NB: Please read and understand well, the instructions to enter the service mode, before you begin. Be very careful. Note how to "EXIT" the service mode; after entering and adjusting data. This is very important.

Sansui Televison... | Answered on Jun 03, 2017 | 84 views

Not finding what you are looking for?
Sansui COM312AD 13" TV/VCR Combo Logo

16 questions posted

Ask a Question

Usually answered in minutes!

Top Sansui Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sansui Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...