20 Most Recent Hoover AAA160 Front Load Washer - Page 10 Questions & Answers

take down make & model # contact manufacturer technician line, you may also turn your power on and off to wi-fi and retry to see if it works

E08 is the motor speed sensor error code. Suggestion: Try a cycle with very few garments and see if it completes the cycle.

Try unplugging for 5 minutes. That may reset electronics

Error code E08 means overloading (too many clothes in the drum). Don't worry, just reduce the load size by removing some of the garments in the drum.

Check if the machine is on drip dry cycle. Make sure it is pumping out. It wont spin until the water is out. There may be a blockage in the hose or pump. Check the belt may have broken. Worst case is the transmission has failed. If there is a tide mark of orange rust / grease around the inside of the cabinet, its a sign the drive has failed.

sound like an electrical circuit problem..I had to have mine changed. There are circuit boards that control these functions.

Hi! I'm adding a link to a manual of Hoover Tumble. Hope it will help! https://manualsbrain.com/en/manuals/754807/?page=12

It’s a door lock or motor related error. Make sure drain pump isn’t obstructed.

See THIS Link... Item 1548793. MORE 500M parts here: HOOVER 500M Parts List BigWarehouse Spares

https://www.espares.co.uk/advice/careandmaintenance/how-to-fix-an-e08-error-code-on-a-hoover-washing-machine Hope this helps.

replace water level sensor if less than 5 years old should be able to get the part from a washing machine repairer or hoover washing machine parts supplier

lower the drain hose past the tub level and the water will drain out if inside use a bucket to collect the water when empty switch off the taps and use the spin cycle to dry the clothes