Top 20 Hoover Nextra HNF 3157 Front Load Washer - Page 3 Questions & Answers

1helpful
1answer

Hoover condenser dryer plug fuse blew

Crackling certainly doesn't sound good. How many days past warranty. Contact them, " 2 weeks ago my washing machine stopped working, I was going on a business trip, and couldn't do anything about it. I checked the fuse and it had blown. I replaced the fuse and it still doesn't work. When the machine failed it was in warranty, please come and fix". If not, the most likely issue for 'crackling' would be the control board or the motor, leaning slightly to the control board as it has no power visible to it. A failed motor would have power to the board, but nothing happening.
11/23/2021 9:53:03 PM • Hoover Washing... • 140 views • 1 helpful votes
0helpful
2answers

Buttons aren't working properly

Faulty control panel
10/11/2021 11:12:57 AM • Hoover Washing... • 69 views • 0 helpful votes
1helpful
1answer

My 7 kg hoover washing machine started sparking underneath then it stopped & unable to start.

There is a common issue with those machines and the wiring harness, when the machine spins, the drum causes the wire harness to flex and vibrate and this can cause the wires to break loose. To check this you need to unhook and unplug the unit and drain it, Then you can lay it down and look under it to see what is causing the issue;
6/11/2021 5:32:23 PM • Hoover Washing... • 1,649 views • 1 helpful votes
0helpful
1answer

Hoover smart wash not spinning

COULD BE ANY NUMBER OF THINGS. CONTROL BOARD . MOTOR , TRANSMISSIN, CALL A LOCAL REPAIR SERVICE
7/18/2021 2:59:06 AM • Hoover Washing... • 502 views • 0 helpful votes
0helpful
1answer

What does error code E01 indicate?

Error code E01 indicates a defective door latch or associated wiring or connection to control board.
6/25/2021 7:55:52 PM • Hoover Washing... • 886 views • 0 helpful votes
1helpful
1answer

Hoover / Candy washing machine dwot413ac3 won't start washing

Possibly the control board is failed.
8/18/2021 12:06:52 PM • Hoover Washing... • 117 views • 1 helpful votes
0helpful
1answer

I have a Hoover 500 MA that will not turn the agitator or spin at all.

I would suspect the transmission has gone out .but with out any testing no one can ever be sure
6/27/2021 7:05:42 AM • Hoover Washing... • 116 views • 0 helpful votes
0helpful
1answer

Good day my Hoover 10.1kg 2speed washing machine wash and drain but does not spin. Any help will do. Thanks

Most likely is the lid lock. Logic board will not allow spin to take place if the lid is not locked.
5/31/2021 5:55:12 PM • Hoover Washing... • 96 views • 0 helpful votes
0helpful
1answer

I need the instruction manual for a hoover T4350 washing machine please

CONTACT A DEALER OF THAT MAKE
3/26/2021 10:18:57 AM • Hoover Washing... • 49 views • 0 helpful votes
0helpful
1answer

Model wmh148df. Why is it stuck in spin programme?

Your Hoover could have a stuck cycle timer, a defective control board, or failure of some controlled element, for example the pump.
12/21/2020 2:15:12 PM • Hoover Washing... • 110 views • 0 helpful votes
0helpful
1answer

Front loader. Why doesn't it start and why doesn't door open?

Either the door lock has failed or the wiring or the programmer has a problem. Removing the cabinet top should allow a view of the wiring, etc. Manipulating or removing the door lock from inside the cabinet isn't easy as often the retaining screws are accessible only when the door is open and carefully applied brute force is the last resort.
9/12/2020 10:02:13 PM • Hoover Washing... • 79 views • 0 helpful votes
0helpful
1answer

Can you supply a replacement detergent drawer for a Hoover Nextra HNL 3166 Z Front Load Washer? Des Hill

fixya does not sell Hoover parts. check with an appliance parts supplier or directly with Hoover.
8/26/2020 12:50:07 PM • Hoover Washing... • 43 views • 0 helpful votes
0helpful
1answer

Hi My Hoover dynamic next washer model no DXC A48AW3/1-80 has an issue the machine starts to fill then appears to over fill then stops and gives an error code E02, any thoughts please

Hoover suggests that the water fill valve(s) may be turned off. Error 2 means It cannot fill correctly according to their owners manual.
2/6/2020 2:06:03 PM • Hoover Washing... • 245 views • 0 helpful votes
0helpful
1answer

Hoover Quest 1000. It just goes on Beeping and nothing happens when I press Dockin

Try here https://www.fix.com/parts/
12/8/2019 11:16:06 PM • Hoover Washing... • 206 views • 0 helpful votes
1helpful
1answer

Hoover washer e09 error code

Error code E09means there is something wrong with the part in the washing machine control board that drives the motor.
5/22/2019 8:03:20 PM • Hoover Washing... • 6,861 views • 1 helpful votes
0helpful
1answer
Not finding what you are looking for?
Hoover Nextra HNF 3157 Front Load Washer Logo

Popular Tags

49 questions posted

Ask a Question

Usually answered in minutes!

Top Hoover Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hoover Washing Machines

  • Hoover Washing Machines

Most Popular Question

washer will spin but

  • Washing Machines
Loading...