Top 20 Hoover Nextra HNWL 3126 Front Load Washer / Dryer - Page 3 Questions & Answers

Possibly the control board is failed.

I would suspect the transmission has gone out .but with out any testing no one can ever be sure

Most likely is the lid lock. Logic board will not allow spin to take place if the lid is not locked.

CONTACT A DEALER OF THAT MAKE

https://www.espares.co.uk/advice/careandmaintenance/how-to-fix-an-e10-error-on-a-hoover-washing-machine ..

Your Hoover could have a stuck cycle timer, a defective control board, or failure of some controlled element, for example the pump.

https://service.hoover.co.uk/advice-centre/the-letter-h-and-a-number-has-appeared-in-the-display-of-the-washing-machin/

Either the door lock has failed or the wiring or the programmer has a problem. Removing the cabinet top should allow a view of the wiring, etc. Manipulating or removing the door lock from inside the cabinet isn't easy as often the retaining screws are accessible only when the door is open and carefully applied brute force is the last resort.

fixya does not sell Hoover parts. check with an appliance parts supplier or directly with Hoover.

https://www.youtube.com/watch?v=3R_RYO6jSOs E21. Canister fill pump triac faulty. Possible fault Wiring faulty; Electronic board faulty. https://www.how-to-repair.com/help/e21-e22-error-code-tumble-dryer-pump-fault-aeg-electrolux-zanussi-etc/

https://www.youtube.com/watch?v=zjULf1lLW5U

Hoover suggests that the water fill valve(s) may be turned off. Error 2 means It cannot fill correctly according to their owners manual.

Try here https://www.fix.com/parts/

Error code E09means there is something wrong with the part in the washing machine control board that drives the motor.

Is usually a sign the washtub suspension is worn or broken.

Hi! Look here:https://service.hoover.co.uk/advice-centre/error-code-e20/ - error solvinghttps://www.bestadvisers.co.uk/portable-washing-machines - portable washing machines, just in case (i use it like an extra washer)

https://www.espares.co.uk/advice/careandmaintenance/how-to-fix-an-e08-error-code-on-a-hoover-washing-machine or this https://www.youtube.com/watch?v=Fd8ddreBYL4

i only find e21 error for hoover washers...

there are many models most common one has a bolt located at the bottom of the inside of the agitator remove cap to see it you will need several extensions,10mm socket and ratchet

Defective power switch and/or cycle timer