20 Most Recent
Hoover 24 in. DT999 Free-Standing Dishwasher - Page 8 Questions & Answers
My hoover dishwasher is not heating up during the
The most likely cause is the element has failed. It is easy for an engineer to check this. Do you want to do the check yourself?
I hope I have been of help but please do not hesitate to ask if you have any further questions.
I appreciate your vote if you appreciate my reply.
2/22/2011 3:24:58 PM •
Hoover...
•
Answered
on Feb 22, 2011
All four lights come on
Check that the inlet to the water level sense switch is clean. If that blocks it cannot sense the water level and will over fill.
2/6/2011 12:07:44 PM •
Hoover...
•
Answered
on Feb 06, 2011
Dishwasher(HED668-80) if not used for
It will be good to remove the drain pump/drain filter and clean them after making sure that there is no accumulation of dirt on the filters.
sometimes a lag of the drain will make the controller stop any further action on the next cycle- wash.
Also make sure there is good pressure of water, the pressure pumps are clean .
Once established that there are no issues on the pump then you can turn your attention to the controller unit once again.
Check the program controller unit for any signs of loose connections. remove and reconnect all the connectors. make sure that there is no moisture build up within the program controller unit.
Now set back to check if there is any change, if not the control unit can be faulty.
12/20/2010 10:09:25 PM •
Hoover...
•
Answered
on Dec 20, 2010
Not finding what you are looking for?