Top 20
Fisher and Paykel Fisher & Paykel Washer Questions & Answers
My Fisher & Paykel smart
this sounds like a computer error asthe first and last lights is an error code 129 which does not exist if its the first and second to last light then its a sensor fault
11/14/2017 6:09:03 PM •
Fisher and...
•
802 views • 0 helpful votes
Smart drive 601
If it is out of balance it will automatically return to a wash cycle to try and redistribute the clothes more evenly. Maybe the out of balance switch is faulty. More likely though is a faulty control board. If that then get a new washing machine. That model is over 20 years old. Not worth spending money on it.
1/23/2018 1:33:03 PM •
Fisher and...
•
91 views • 0 helpful votes
My washing machine was on
Could be a overheating pump. hope you got it checked out! probably blew the board when the pump went.
8/30/2017 7:33:02 AM •
Fisher and...
•
97 views • 0 helpful votes
What does fault code 51 mean
if you have a 51 fault the machine must be a diverter valve model machine which has a water save function,check the diverter has nothing jammed in it and that the soleniod is ok with a multi meter if it passes both checks then it your main computer board
9/30/2014 2:11:53 PM •
Fisher and...
•
2,457 views • 0 helpful votes
How do i soak in my machine
If the machine has a soak button on the panel, when pushed, it will fill and wash and then it will stop for around 2 hours. Then it will continue the rest of the cycle. If no soak button is on your model then it won't do any of that.
10/20/2014 12:18:09 AM •
Fisher and...
•
122 views • 0 helpful votes
How to clean pump from smartdrive 501?
there is no cleaning as such,but if your havig drainage problems then remove pump check for anythining that might jam it and lookat the electrical windings for any discoloutation if there is replace pump
7/6/2014 2:01:34 AM •
Fisher and...
•
113 views • 0 helpful votes
Fisher paykel smart drive 601
Hi just read your post.When the machine beeps a series of lights will light up on the wash progress line of lights. Staring from left to right the long wah is number 1 and the spin light is number 8 which lights sre on when the machine beeps, is it 2, 4 and 8 or 1, 3 and 7 etc.Please reply with this information and I sure I can help you. Regards LU
1/24/2014 7:40:40 AM •
Fisher and...
•
359 views • 0 helpful votes
Error code 40
40. (00101000) Bowl Dis-engage Fault
While carrying out a bowl check, the Motor Control Module has found that the bowl is not
engaged even though the pressure sensor indicates that the bowl is empty. The Motor
Control Module continues to check for 2 minutes, after which time it displays this fault. The
first two areas to check are the clutch and the pressure tube. If these two appear correct,
then the fault could be in the pressure sensor in the Motor Control Module.
Primary Source: Mechanical.
Action: 1) Check that there are no clothes or other foreign objects preventing
the clutch from re-engaging. Excessive suds can stop the bowl
rotating.
2) If the machine is empty of water, carry out a clutch disassembly
procedure and check the spline drive.
3) Next check that the pressure tube has not come off and that it is
not kinked.
Secondary Source: Motor Control Module.
Action: Replace Motor Control Module.
11/6/2013 7:49:35 PM •
Fisher and...
•
189 views • 0 helpful votes
Not finding what you are looking for?