20 Most Recent
Ricoh Aficio 3045, 3035 Kit - Page 9 Questions & Answers
How to clear error sc 491 in ricoh c2500
An error signal is detected for 0.2 seconds when charging the drum or development.
• High voltage leak
• Broken harness
• Defective drum unit or development unit
• Defective high voltage supply unit
I have Ricoh MPC 2051 erreur code SC 452
Possible• Defective
• Defective PTR contact sensor
• Defective PTR contact motor
• PTR contact motor overload
• Broken +24V fuse on PSU
• Defective or disconnected harness.
• Defective BCU
How to clear error sc303 in ricoh c2500
sc 303 is ac charge output error ( Y drum)
Possible Causes
• Disconnected or broken high voltage cable
•Yellow PCU could be defective or not installed
• Defective high voltage power supply
How to remove sc 350 error in ricoh mp171
SC350: ID Sensor Error
Possible Causes
· ID sensor defective
· ID sensor connector defective
· Poor ID sensor connector connection
Dirty ID sensor
· Defect on the drum at the ID sensor pattern writing area
SC 672 error apears in my ricoh 4002SP. what shal i do?
sc 672 Controller-to-operation panel communication error at startup
Possible Causes
? Controller stalled
? Controller board installed incorrectly
? Controller board defective
? Operation panel connector loose or defective
? The controller is not completely shutdown when you turn the main
switch off.
Check the setting of SP5875-001. If the setting is set to "1 (OFF)", change it
to "0 (ON)".
Not finding what you are looking for?