Top 20
Pioneer DEH-P6800MP CD Player Questions & Answers
How do you get the cd out?
You may want to try disconnecting the power and then reconnect power after about 20 seconds, if you haven't already tried that.
1/30/2013 5:44:45 PM •
Pioneer...
•
31 views • 0 helpful votes
How to reset an kenwood excelon KDC-X890 display screen is blank
If the screen is blank I doubt if resetting it will help. More than likely you have some bad solder connections on some surface mount resisters inside of the radio. Unless you are good at soldering small components I would suggest you have it repaired professionally.
10/31/2012 8:09:50 PM •
Pioneer...
•
247 views • 0 helpful votes
I have a problem with my pioneer DEH-6800MP
did you test that there is 12 volts? do you have a multimeter to test it? make sure the connections are good. make sure it's grounded properly, the circuit needs to be complete to have the display working.
3/1/2011 6:41:30 PM •
Pioneer...
•
409 views • 1 helpful votes
Error 11 came up out
That ERROR code is a CD problem,
ERRORĀ·11, Dirty disc Clean disc/Scratched disc Replace disc.
ERRORĀ·11, Electrical or mechanical, Turn the ignition ON and OFF, or
switch to a different source, then back to the CD player.
This unit may not operate correctly depending
on the application used to encode WMA files,
Depending on the version of Windows Media
Player used to encode WMA files, album
names and other text information may not be
correctly displayed.
I hope that helps as I have an on line manual to be found here, Good luck with it.
http://a248.e.akamai.net/pix.crutchfield.com/Manuals/130/130DEHP680.PDF
3/28/2011 3:12:53 AM •
Pioneer...
•
186 views • 0 helpful votes
Error A0 ...what thats mean...How can I fix it
hi,
-
From page 14 of the owner's manual, the error code AO indicates an "Electrical or Mechanical cause"; they recommend turning the ignition off and then back on, and then toggling from CD to radio and back to CD again.
If you're still getting the error code, then you can try to check for loose connections yourself (or perhaps a jammed disc?), but you'll probably have to take it to a certified Pioneer Service Center or the dealer where you purchased the unit.
-
good luck!
2/15/2011 6:42:07 AM •
Pioneer...
•
535 views • 0 helpful votes
I have a 1996 Honda
Please check the wiring, specially the speakers cables according to picture below:
3/3/2011 3:09:05 AM •
Pioneer...
•
111 views • 0 helpful votes
I am trying to hyook up this pioneer DEH-P6800Mp
you can get power from the fuse box ,the factory harness has a wire for the lights use a test light to see which one it is by turning the lights on and off to see which wire is hot when the lights are on
2/2/2011 8:58:12 PM •
Pioneer...
•
83 views • 1 helpful votes
Not finding what you are looking for?