20 Most Recent Durabrand DWT1905 TV - Page 4 Questions & Answers

Hello
Will you please give me details your TVs complaint in English language please. I can't get you. OK.

Hello

What is your TVs actual problem?. Specify it with some more words please.

Hello

You just try these codes. One amoung them will wake up your tv.

0189 _0135_ 0157_
0153_ 0254_ 0458_ 0217

Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

the code is 24795

use the manual to program the relevant code into your universal remote

there is a code finder function on your remote
just check your instruction sheet

If you are using the fron input jacks you need to press the [Game] button on your remote control. you can switch back when your done by pressing Vol. or Chan. buttons. If this doesn't help please let me know how you have it hooked up, I might be able to assist more. Also I have a copy of the owners manual If you need it.

It is probably fried. Was there a power surge or spike?

You need a "tv/video" or "input select" button.
Alternatively, you can use a VCR to send input signals to channel 3 or 4.

You need to get a universal remote with a "input select" or "tv/video" button. Then, you need to program the remote to control the tv. Finally, press the button mentioned earlier. Tada!

You need a universal remote with a "tv/video" or "input" button.

Found these codes listed at another website. Try each and see if any work.

Duraband codes: 463,027,096,115, 520,916

Good luck

on some tv's you can go back through the channels and it will get to AV (eg: 2,1,0,av1,av2,99,98...)

Some TV's will have an AV or input selector buton on them

and on most TV's you cant put it to AV input without the remote... you could try a "0ne for all" remote, they generally work and are cheap

If you could supply the make and model of the remote itself I am sure we can help.

The TV model is a great start but we are lacking information to complete your reqest

This process should be used if the code for the device is not listed in the Manufacturer Code List.

1. Turn on the device you wish to program.
2. Point the remote control at the device.
3. Press and hold the Mode key (TV, DVD or AUX) you want to program. Without releasing the selected Mode key, press and hold the OK key simultaneously
4. Release both the Mode key and the OK key at the same time.
   All the Mode keys will flash twice indicating programming mode.
5. Enter code 922 by pressing the number keys on the remote control. The selected Mode key will flash twice indicating correct entry.
   Note: This next step is For AUX Searching only, press and release the PLAY key then press:
   • 1 for VCR
   • 2 for Receiver/Tuner
   • 3 for Amplifier
   • 4 for Home Theater In The Box (HTIB)
   
   All the Mode keys will flash twice indicating correct entry.
6. For AUX only, press and hold the PLAY key and wait until the device turns off, then release the PLAY key.
   • The REW key can be utilized to go back through the codes one at a time.
   • The FF key can be utilized to move forward through to codes one at a time.
   • Press the PLAY key to resume auto search of device codes.
7. To save the code, press the ENTER key on the remote control (bottom right) or press the EXIT key to return to normal operation.
   The selected Mode key will flash three times and return to normal operation.
8. If no valid code is found, the red light will flash two times and the remote control will return to normal operation.
9. Turn the device back on using the remote control. If this doesn’t work start over or try Manual
10. Press the appropriate Mode key on the remote control to work with the selected device. To use the remote control for the AT&T U-verse TV Receiver, press the AT&T Mode key.

I can help you with your URC-3220 Universal Remote Control issues.

The codes for Durabrand TV's are: 0003, 0171, 0178, 0180, 0463, & 1034.

For complete instructions on entering the URC-3220 remote codes, please refer to my posted Fixya Tip One For All URC-3220 Code Entry.

I hope that helps.
_______________________________________________
One For All URC-3220 Manual
One For All URC-3220 Code List
One For All URC-3220 Code Entry
One For All URC-3220 Code Search
One For All URC-3220 Reassign Key

http://www.usersmanualguide.com/funai/television/dwt1905
User manual above, it shows you how to setup the manual audio.

Check user guide. If your TV has control buttons in the front try pressing the function button. watch the menu and proceed.