20 Most Recent Durabrand DWT1905 TV - Page 6 Questions & Answers


Hi there
For many brands the way to find the a/v input is to use the channels buttons and go below channel 2 or above 125.
Or you might find it in the menu if you can access it.
Hope this help. Merry christmas
P.s please do not rate this answer (unless it helps) as it is only a suggestion.

Durabrand... | Answered on Dec 16, 2009


http://www.manualsnguides.com/search.php?cmarque=DURABRAND&modele=BH2004D

Durabrand... | Answered on Dec 16, 2009


If you are using a regular antenna to receive the signal, then you would need to either find a signal booster of some sort, or improve the antenna. There are many antennas out there for the digital era, most of them are set-top multi-/omni-directional ones, but they have their limitations. Unfortunately to get a better signal, typically an outdoor antenna is needed, or a large expansive one in the attic.

Durabrand... | Answered on Nov 19, 2009


Hi,
You may want to try the codes for Orion and Funai if Philips supports
these, since these are the 2 most common manufacturer of Durabrand.

Good Luck,
Moozler

Durabrand... | Answered on Oct 28, 2009


you can contact dura brand on the back of the unit it should tell you where it was made and if your lucky a phone no see if you can locate a schematic there
http://www.funai-corp.com/
in most cases there are not many parts aviable to repair it with there were made to sell at a price point for a retail chain


Durabrand... | Answered on Oct 26, 2009


It's the Vertical circuit board, you can fix this by re soldering all the cracked or damaged joint on the board.

To find it, you can follow the Yoke cable ( 4 cable connected to the neck of CRT ), 2 of it is for Horizontal deflections, sometimes with Red color, then the other two on the side is the Vertical Deflections, follow that circuit.

Durabrand... | Answered on Oct 23, 2009


use yellow red and white from the dvd players video out to the tv video input. Yellow is for video red and white Audio left and right.

Durabrand... | Answered on Oct 18, 2009


bought a tv by durabrand and the v-hip is locked............help

Durabrand... | Answered on Oct 16, 2009


Tries this website 1-800-Remotes Factory Originnal.Get the original remotes.

Durabrand... | Answered on Oct 09, 2009


go to menu settings, make sure it is on air or CATV depending on what you are using. CATV is for cable or dish.
Then go to menu settings and find the "autoprogram" option and select it. It will scan any available channels. Let it run through completely.

Durabrand... | Answered on Oct 01, 2009


You can buy one here:
Remotes

Durabrand... | Answered on Sep 22, 2009


TV ENGINEER SAID IT WAS NOT WORTH MENDING[OR BUYINGIN THE 1ST PLACE] SO THREW IT AWAY. AND GOING TO BUY A NEW ONE DIFFERENT MANUFACTURER.

Durabrand... | Answered on Sep 09, 2009


First, you need to realize that there is no such thing as a 'universal remote.'  At best, they are multi-brand remotes.
You might get lucky if you try any codes you have (or can retrieve from the Tandy website) if you check these brands too:
Funai, Symphonic, Sylvania, Emerson, Aventura, Durabrand, ESA, Magnavox, INSIGNIA, and Misakai
They are all made by Funai, one of the worst manufacturers in Asia. 

Durabrand... | Answered on Sep 08, 2009


Try a universal remote, if there is no video button on the TV.

Durabrand... | Answered on Sep 07, 2009


A Philips Universal remote model CL032 will operate all functions on the Durabrand TV. The codes on the instruction sheet will not work. You will have to do a library search on the remote. You will have to push the channel plus button 40 times. This will make since after youread the instructions.

Durabrand... | Answered on Sep 07, 2009


You can program a Comcast remote to work with the TV. Press the "TV" button on the Comcast remote. Then, hold down the "Setup" button until the red light blinks 3 times. Enter a 5 digit code:
These are the Durabrand codes: 10171 10463 10180 10178 11034
The 10171 code worked for my Durabrand DWT1905. Then use the TV/VCR button located beneath the "7" to switch inputs.

Durabrand... | Answered on Sep 06, 2009


is there a magnet or speaker near your set?

Durabrand... | Answered on Aug 28, 2009

Not finding what you are looking for?
Durabrand DWT1905 TV Logo

310 questions posted

Ask a Question

Usually answered in minutes!

Top Durabrand Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76171 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Are you a Durabrand Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Durabrand Televison & Video

  • Durabrand Televison & Video

Most Popular Question

por favor nececito el codigo para mi

  • Televison & Video
Loading...