20 Most Recent Durabrand DWT1905 TV - Page 7 Questions & Answers


http://remotes.com/remotes/servlet/rs?a=Search&mode=brand&uid=0&brand=Durabrand&uuid=12513991933870
or you can buy universal remote anywhere.

Durabrand... | Answered on Aug 27, 2009


G'Day!

Unfortunately, if there isn't a button for it on the panel of the TV, there is no way to switch the mode without the remote. Just like these new DVD players that only have a power, play, and eject button on the unit itself. Without the remote, you can't access any other feature or command.

I hope I've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response. I hope I've earned a good rating from you today.

Please let me know if I can be of further assistance.


Durabrand... | Answered on Aug 17, 2009


try to press the display button on your remote for 5 sec, when the lock symbols disappear turn off your unit on the remote and unplug it

Durabrand... | Answered on Jul 31, 2009


Durabrand television's are grate little units, I can't be leave how clear.
I just picked one up this evening. You can pickup a remote at Home Depot for around $10.00USD or order from manf. for twice that.!

1. The Menu key on the front will bring you into the basic setup screens.

Channel setup
V-Chip Setup
Caption
ect.

Using the Volume + and - along with the Channel up (+) and down(- ) key's, will give you all the adjustments you may need without a remote control.


Hope this answers your questions and helps you reset the unit withouut too much trouble.

John Ray
john@johnrraycomputer,com

Readers, Please rate your Technician's information.
Thanks,

Durabrand... | Answered on Jul 13, 2009


Unfortunately, there are no codes available for that particular brand of TV. Don't bother with a universal remote because you'll have the same problem. The manufacturer of that TV didn't communicate with any universal or cable remote manufacturer which is why it can only be controlled by the original remote or a replacement from the manufacturer of the TV.

I hope I've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response. I hope I've earned a good rating from you today.

Please let me know if I can be of further assistance.

Durabrand... | Answered on Jul 12, 2009


If it's only three months old then return it for exchange or refund.

Durabrand is one of many low budget no-name brands which buy generic products at the lowest price possible and then stick their badge on the front.

This is great for bargain hunters, but at the price they buy items for there is very little quality control at the factory on what's being shipped out As a result, problems of the type which you describe are especially common within the first few months of use which is effectively a running in period which will reveal any defects.

I'm not knocking your choice of DVD player, but you do get what you pay for.

Durabrand... | Answered on Jul 03, 2009


Yes, this looks as if you have a bad connection somewhere in the audio stage, this should be able to be fixed by a simple re-soldering.

Durabrand... | Answered on Jun 28, 2009


like I said before to to people... if your channels are showin up like so (4.1 or 4-1) then yes it's digital!

Durabrand... | Answered on May 23, 2009


Hi trckynky,

I am unable to find the Duraband tv, however many times you can search fo one that will work.

Try this.
  1. Turn on TV
  2. Press and hold the TV button on the remote
  3. While holding the TV button also press and hold the power button.
  4. The light on the remote should go out and then a second later come back on.
  5. Release both buttons, the light should remain on.
  6. Aim the remote at TV and press the power button about every 5 seconds until TV turns off.
  7. Press the STOP button at bottom of remote., this will lock in the code.
  8. Use the remote to turn TV back on and test all buttons on remote to insure you have the correct code.
If the remote will work with Durabrand this is the way to find it, unfortunately the remote may not work for all TV's.

Let me know if I can assist further.

Please rate this solution.

Lone99star

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jason_77a19afa8d604dee

Durabrand... | Answered on May 17, 2009


1. I manually turned the TV on.
2. Then I pressed and held the component key (which was TV) the light turns on and remains on.
3. While holding the TV button down, I pressed and held the on/off key. The LED indicator light turns off.
4. After holding down both keys for three seconds, the LED light tuns back on.
5. Press and release the on/off button until the TV turns itself off. YOU FOUND IT'S CODE.
6. NOW press the stop button and the LED light turns off.
As mentioned above the code isn't perfect cause the volume up is the subtitle button and the menu for the TV is the volume up.. ----- Volume down, on/off, tv/video all work the way they should. It's good for you and you work until get the Durabrand TV remote control.
Hope this helps.


click this link for more help
http://forum.ecoustics.com/bbs/messages/5/137360.html

Durabrand... | Answered on Apr 20, 2009


yes i fixed the problem, I googled for codes for direct tv and got a list of codes for durabrand, here are the codes i found==10463.10180 10178 11034 10003 this is the one that worked for me--10171

direct tv satalitd calls for 5 numbers

cable vision only calls for 4 mumbers
i found these on a chart, 0067 1467 0586

hope this helps someone
bettyh13

Durabrand... | Answered on Apr 13, 2009


you cant i haver tried many times and many ways but a cheap universal remote does the trick

Durabrand... | Answered on Apr 01, 2009


When programing a universal remote for a DWT1905 try the codes for FUNAI from the list that came with your universal remote.

Durabrand... | Answered on Mar 13, 2009


Try the codes for FUNAI. They made this tv for Walmart.

Durabrand... | Answered on Mar 06, 2009


go to menu and see the option for games.

 

Durabrand... | Answered on Mar 03, 2009


Connect converter cable to the antenna inputs. If you need help identifying them, here is a link to the owners manual that identifies all the hook ups.
http://www.funai-corp.com/6pdf/om/DWT1905.pdf
Hope this is a Fix Ya......

Durabrand... | Answered on Feb 20, 2009


Look at page 3 of your manual. It explains closed captions an the different modes.

In case you don't have a manual, you can find it here.

Durabrand... | Answered on Feb 17, 2009


I assume that Durabrand is sold by Walmart and in that case it should be a TV manufactured by Funai. (Thanks here to wikipedia!)

The manual should be this one.

Good luck!

Durabrand... | Answered on Feb 17, 2009


MOST PROBABLY DRY SOLDER IN THE POWER SUPPLY SECTION OR REPLACED THE HORIZONTAL DRIVER TRANSFORMER . MUKU

Durabrand... | Answered on Feb 07, 2009

Not finding what you are looking for?
Durabrand DWT1905 TV Logo

310 questions posted

Ask a Question

Usually answered in minutes!

Top Durabrand Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Are you a Durabrand Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Durabrand Televison & Video

  • Durabrand Televison & Video

Most Popular Question

por favor nececito el codigo para mi

  • Televison & Video
Loading...