20 Most Recent Durabrand DWT1905 TV - Page 8 Questions & Answers


the chroma section pcb (cnnected to the back of picture tube) parts , some of it has loosen resolder it ......

Durabrand... | Answered on Feb 03, 2009


I have been searching for a remote for this TV(Durabrand bh2004d) and found one that works. The X10 Platinum Model UR73A 5in1 remote. Best thing since sliced bread. I tried this remote out of desparation when all others would not work. I picked one up on ebay for about $10 including shipping. This remote has worked for changing the video mode(A-B).and all functions and also controls my directv box, so it will be the only one that I will need. Hoped this helped

Durabrand... | Answered on Jan 28, 2009


For Durabrand TV BH2404 the codes for the "one for all" URC-21 B00 in the book are 0178, 0180 on the webpage they also have 0003, 0171, 0463, 1034
Try also (tried have worked) 0154, 0171, 1034, 0236, 0623, 0493, 1038, 1046 , 1047, 1109

Durabrand... | Answered on Jan 27, 2009


check for loose solder joints

Durabrand... | Answered on Jan 26, 2009


All information I found indicated that this is an NTSC receiver and will require a converter box to receive the coming digital broadcast signals. If you have cable or satellite, the drop-dead date is later and up to the provider.

Durabrand... | Answered on Jan 26, 2009


The main power supply is expiring.
You might want to consider having it repaired; if you do, it will outlast most all of the 'flat panel' sets being sold right now.
Also:
Your set was built only with an NTSC tuner that will be obsolete in the near future. I have surveyed as well as possible and procured Zinwell ZAT-970 converters for our back-up sets.   (The new pretty ones will break fairly soon according to what I find here - keep your old set dry if you buy a new flat panel - you'll need it again.) 

If you have no manual for your set, you can download one here: 
Durabrand (Funai) manual

Durabrand... | Answered on Jan 23, 2009


Yes; your set was built only with an NTSC tuner that will be obsolete in the near future. I have surveyed as well as possible and procured Zinwell ZAT-970 converters for our back-up sets.  (The new pretty ones will break fairly soon according to what I find here - keep your old set dry if you buy a new flat panel - you'll need it again.) 

If you have no manual for your set, you can download one here: 
Durabrand (Funai) manual

Durabrand... | Answered on Jan 23, 2009


Many circuits operate with millionths (and less) of an ampere and if the set was operated with any residual moisture, it may have destroyed any number of them.

Durabrand... | Answered on Jan 23, 2009


If the set has contrast and brightness controls, try them but this problem is normally caused by a certain capacitor (I don't know the circuit reference number for this one) failing and it will continue to decay. Any competent TV tech (if you can still find one) will know where to look.

Durabrand... | Answered on Jan 23, 2009


Try Funai codes if they are listed; your set was made by them.

Durabrand... | Answered on Jan 23, 2009


The converter must have an "analog pass-through" feature to view existing stations until the changeover. Not all of the 'approved' boxes had the feature and you didn't include the model number so we could check for you.
If you were dependent on an outdoor antenna, you will still need it for the (any) converter box. 

Durabrand... | Answered on Jan 23, 2009


Yes; your set was built only with an NTSC tuner that will be obsolete in the near future. I have surveyed as well as possible and procured Zinwell ZAT-970 converters for our back-up sets.  (The new pretty ones will break fairly soon according to what I find here - keep your old set dry if you buy a new flat panel - you'll need it again.)
If you have no manual for your set, you can download one here:
Durabrand (Funai) manual

Durabrand... | Answered on Jan 23, 2009


If you do not get result you can purchase one video rf converter. Rf converter contains one video input in yellow colour and two audio in red and white colour and one cable connector as outout. Connect dvd output to this converter and tune the program in which place you receive dvd signal.

Durabrand... | Answered on Jan 20, 2009


198 is the code that worked for me.

Durabrand... | Answered on Jan 17, 2009


The DTV1907 is digital, but it must be programmed. If you need help with this call the customer service number on the set.

Durabrand... | Answered on Jan 15, 2009


Remotes available at:
http://www.electronicadventure.us

Durabrand... | Answered on Jan 13, 2009


Hi, The TV has an analog tuner only and so is not DTV ready. You will require a seperate set top box to receive digital programs with it. If you have brought the set recently it should have had an appropriate warning label on it. If not ,you may have some come back with the store which sold it.(depends on the country where purchased)

Durabrand... | Answered on Jan 02, 2009


I'm sorry, but the DWT1304 is no digital. If you use an antenna for your signals, you will need a converter box.

Durabrand... | Answered on Dec 24, 2008


as per me i think any of the previous tv settings have been changed by mistake and so this comming up.just unplug everything and reconnect and go for scan channels and then reset it.

Durabrand... | Answered on Dec 18, 2008


my dtv1907 goes off after 2 mins

Durabrand... | Answered on Dec 09, 2008

Not finding what you are looking for?
Durabrand DWT1905 TV Logo

310 questions posted

Ask a Question

Usually answered in minutes!

Top Durabrand Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Are you a Durabrand Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Durabrand Televison & Video

  • Durabrand Televison & Video

Most Popular Question

por favor nececito el codigo para mi

  • Televison & Video
Loading...