Durabrand DWT1905 TV - Answered Questions & Fixed issues


Dura Brand TV Model# DWT2704A Serial #T20560222
Using universal RCA remote
Need code

Durabrand... | Answered on Mar 27, 2015 | 699 views


Sounds like tuner fault. Contact any service technician to make it confirm and to replace. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Durabrand... | Answered on Oct 31, 2014 | 99 views


To select its inputs, you should have a remote control.
If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops

Durabrand... | Answered on Aug 11, 2014 | 83 views


Check and replace its tuner. It sounds that is faulty. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box and press "Enter".
http://electronicshelponline.blogspot.com/

Durabrand... | Answered on Jul 17, 2014 | 81 views


Programming procedure is too much to type in here by this window, and is not practical. If you wish to get details; check the site linked here. It have set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" or "Magazine" view. It will make surf easier.
http://electrohelponline.blogspot.com/

Durabrand... | Answered on Apr 19, 2014 | 38 views


Without its remote control, you can't select the inputs. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its user manual. Never accept a remote control, that hasn't both of this. If you see the site by "MOSAIC" view, will make surf easier.
http://electrohelponline.blogspot.com/

Durabrand... | Answered on Apr 03, 2014 | 603 views


There is no set-up code to Duraband TV with this Sony remote control. If you wish to get more codes and other details check: http://electrohelponline.blogspot.com/ & http://electro-medical.blogspot.com/ Both the sites have setup code list, and setup procedure to many popular brand remote controls. Check the site in 'Mosaic' view. It will make search easy.

Durabrand... | Answered on Jan 05, 2014 | 278 views


If you wish to get more codes and other details check:
http://electrohelponline.blogspot.com/
http://electro-medical.blogspot.com/ It has setup code list, and setup procedure to many popular brand remote controls. Check the site in 'Mosaic' view. It will make search easy.

Durabrand... | Answered on Jan 04, 2014 | 294 views


0043,0048,0049,0031. For more, check this link

Durabrand... | Answered on Nov 24, 2013 | 61 views


Check and replace its main system control memory IC.

Durabrand... | Answered on Sep 28, 2013 | 59 views


1061 1203 1177

Durabrand... | Answered on Sep 21, 2013 | 31 views


we have parental lock on our tv.....the screen is blue with a lock in the lower left corner,we can't get it of with our 3in 1 remote....a tv. repair man said we needed the original remote....can you help with this problem

smiller1517@yahoo.ca


Tks.

Durabrand... | Answered on May 26, 2013 | 1,054 views


0628,0982,0184,0278. Check these codes. If you wish to get more details, check this site. Pull up previous posts there. Setup code list and setup proceedings to many popular brand remote controls are given. Three digit, four digit, five digits and two-digit code list are there. Check the site with patience. Surely you'll get a solution to your problem. Search the site by 'Timeslide' option. It will make search easy. Or, type in the brand name to your device into its search box, and press "Enter"

Durabrand... | Answered on Apr 04, 2013 | 142 views


Your set is in service mode now. You have to exit it. If you wish to get more details about how to enter and exit service mode, visit this site. It has details to many brand and models.

Durabrand... | Answered on Apr 01, 2013 | 49 views


There is no sound card separately. The audio output circuit is a part of the main board itself. Check its speaker first.

Durabrand... | Answered on Feb 26, 2013 | 55 views


These are the setup codes for Duraband TV.
0189 0135 0157 0153 0254 0458 0217

Durabrand... | Answered on Aug 13, 2012 | 548 views


0189 0135 0157 0153 0254 0458 0217

Durabrand... | Answered on Apr 23, 2012 | 110 views


Try 0463, 0180, 0178, 0171 or 1034. These were listed as TV codes at www.hifi-remote.com. If they do not work, try 1127, 2164, 0038, 0039 or 1561.

Durabrand... | Answered on Dec 09, 2011 | 29 views


so you can be helped on local electronics store, ask a remote replacement for your tv, or they can help you program to your tv.

Durabrand... | Answered on Nov 08, 2011 | 128 views


Hello
A thin horizontal line across the screen denote that the vertical swep or output has damaged, or there are some loose solder points to vertical output section. Loose solder problems are very common to the vertical output sections of most of the picture tube based TVs. Just open your Tv, and pull out the main baord out of it, which has the vertical output section circuit. You must have some knoldge in electronics to proceed. Locate the vertical output section. usually, this section will be composed of an IC, which will be screwed on to a metal heatslink, to radiate heat out of it when it works. Check whether there is any loose solder terminals at this section, especially look for it at the solder terminals of IC and other components around it.
It is very difficult to detect the loose solder points, as some of them may be so microscopic to detect. Just do, what we do at service table, with this type of fault comes to us. Just resolder most of the suspected solder terminals by applying a little more solder without making any sokder bridge short between adjecent solder terminals.
If this does not help you, check the input voltage to the vertical IC. If found OK, replace the vertical output IC. If there is no voltage to this IC, check the track that brings voltage to that IC. Usually, this voltage will come from one amoung the terminals of LOT [Line Output Transformer]. Check the track, rectifier diode, limiting resistor etc. This is really a skilled work, and you should have all tools for an electronic work, and a skill to detect the faulty component. OK

Durabrand... | Answered on Sep 28, 2011 | 380 views

Not finding what you are looking for?
Durabrand DWT1905 TV Logo

310 questions posted

Ask a Question

Usually answered in minutes!

Top Durabrand Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Are you a Durabrand Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...