Top 20 Whirlpool EL02CCXP 19" Cold Pals Compact Refrigerator w/ 1.8 Cu. Ft. Capacity, Manual Defrost & Reve... Questions & Answers

Your model appears to be quite simple electrically. It does not have a major circuit board it's very possible that the pressure switch, wire connection at the dispenser, hinge or the interlock freezer lightswitch is bad on your model. Do you have a multi-meter/OHM meter? John T. Appliance 911 Appliance 911 Sea Breeze Here is a manual that is very close to your model http://appliance911seabreeze.com/KSBS20QEWH0%20_ED20DFXEB00_Serviice_Manual.pdf

Only way a condensor can go bad is if leaks refrigerant or a line gets kinked. If by chance it gets clogged it can be cleared with nitrogen, it all depends on hold much service the tech knows. hope this helps.

Tom, I would start with the overload and relay that is on the compressor, If it is white it's a good possibility that it has failed. The fact that both sides are not cooling leaves me to believe the compressor is not operating. Take the overload and relay off. If they are both contained in a white cover shake it. If it rattles, I believe that is your problem. Let me know what you find...Catriver.

Delete To replace the LED light in your Whirlpool WRSSDHW08 freezer, follow these steps:

1. Unplug the refrigerator to ensure safety.
2. Remove all the items from the freezer to give yourself more room to work.
3. Locate the light cover inside the freezer. The LED light should be underneath this cover.
4. Carefully pry the light cover off using a flat-head screwdriver or your fingers. Be gentle to avoid damaging the cover.
5. Once the light cover is removed, you should see the LED light module. It may be held in place by clips or plugs.
6. Disconnect the power supply to the LED light. This may involve twisting or pulling the plug from its socket.
7. Remove the old LED light module from the freezer.
8. Purchase a replacement LED light module from the Whirlpool website or an appliance parts store. Make sure to get the correct part number for your specific refrigerator model.
9. Install the new LED light module by connecting it to the power supply and placing it back into its slot in the freezer.
10. Replace the light cover by snapping it back into place.
11. Plug the refrigerator back in and test the new LED light.

If you have any trouble replacing the LED light or if you are unsure about any steps, consult the user manual for your Whirlpool refrigerator or contact a professional appliance repair technician for assistance.

The Whirlpool WRB322DMBM01 refrigerator model typically does not have a dedicated water filter for the ice maker. Instead, it relies on an external water filtration system or an in-line water filter that may be installed in the water supply line connected to the refrigerator. Here's how you can check for and change the water filter for your ice maker: 1. **Locate the Water Supply Line**: Trace the water supply line that connects to the back of your refrigerator. The water supply line is usually a flexible plastic or metal tube that runs from the water source (such as a water pipe or faucet) to the refrigerator. 2. **Check for an In-Line Water Filter**: Look along the length of the water supply line for any inline water filters. These filters may be attached to the water line using compression fittings or push-to-connect fittings. They are typically cylindrical or rectangular in shape. 3. **Inspect the Filter**: If you find an in-line water filter, inspect it to determine its type and condition. Some filters have a label indicating the brand and model number, while others may have a date or indicator showing when it was last replaced. 4. **Replace the Filter (if Necessary)**: If the water filter is due for replacement or is visibly dirty or clogged, follow the manufacturer's instructions for replacing it. This typically involves turning off the water supply, disconnecting the filter from the water line, and installing a new filter in its place. 5. **Flush the System**: After installing the new filter, flush the water system to remove any air or debris. Run water through the dispenser or activate the ice maker to purge the system of any trapped air or loose particles. 6. **Monitor Performance**: Monitor the performance of your ice maker and water dispenser to ensure that the new filter is functioning correctly. It may take a few cycles for the water system to fully adjust to the new filter. If you cannot find an in-line water filter connected to your refrigerator's water supply line, it's possible that your refrigerator does not have a built-in water filtration system for the ice maker. In this case, you may need to consider installing an external water filtration system to improve the quality of your ice and water.

Check the control panel or display on the refrigerator for any error codes or indicators that might suggest a malfunction. Reset the control panel by unplugging the refrigerator for a few minutes and then plugging it back in.

Question turned around for clarity. Whirlpool sell spares including wire baskets https://www.whirlpoolparts.com/Shop-For-Parts/a3b5i554-x676435736861/Gd5sha-Whirlpool-Freezer-Basket-Parts Or places like this https://www.appliancepartspros.com/search.aspx?model=gd5sha ..

https://www.appliancepartspros.com/repair-help/whirlpool-refrigerator-wrf535smbm00-repair/wrf535smbm00-ice-maker-not-making-ice.html Whirlpool Refrigerator WRF535SMBM00 Ice maker not making ice Causes of a bad icemaker cycling thermostat can include electrical malfunctions, temperature sensor issues, or wear and tear. Symptoms of a bad icemaker cycling thermostat may include: Inconsistent ice production. The icemaker not cycling properly.

HOW-TO: Whirlpool Refrigerator WRF535SMBM00 Ice maker ...

There is no water filter.

Where is the filter for water for ice maker located on

JustAnswer https://www.justanswer.com > Appliance Repair Jul 23, 2018 - This particular model does not have a filter built into it so that is why you can't find one. If you wanted to add a filter, you can get an in- ...

If it has a defrost timer, some are adjustable. If not just replace it. https://www.google.com/search?q=Whirlpool+freezer+defrosting+too+often ..

Click on Part 20, Bi-Metal Defrost. I have never seen one like this before! https://www.partselect.ca/Models/WRT549SZDM01/Sections/Liner-Parts/?ModelID=7185057&ModelNum=WRT549SZDM01&mfgModelNum=&ManufactureID=3&Selected=28E07ECB18AF9AC514E92A1E4DCDBD928C532352&Position=4&mfg=Whirlpool&Type=Washer&Mark=4 ..

See page 11 troubleshooting of manual. This problem is discussed there. Whirlpool GS5VHAXWY - 25.6 cu. Ft. Refrigerator Use And Care Manual (Page 11 of 37) ' ManualsLib

Question edited for clarity, spelling of maker, toss in a load of CAPS. Question moved from Cars and Trucks. Yes they do. https://www.google.com/search?q=whirlpool+et1mtkxkq20 ..

Question edited for clarity Zeros (0) and ohs (o) aren't interchangeable in serial numbers :>D If icemakers are going wrong it is best just to replace the complete icemaker unit. They work in a very hostile environment or cold, wet, electricity and limescale and bio-slime. Some commercial icemakers I have witnessed in catering facilities would have you never taking ice in a bar or restaurant again! https://www.google.com/search?q=Whirlpool+MFI26665XEW3+parts ..

A clue to what the faults were may help you get an answer.

As the freezer is working you can probably discount that the reason is low refrigerant gas. The other reasons would be that the fridge circulation fan has failed. or The channel that directs cold air from the freezer is blocked with ice at the rear of the freezer. It happened to my GE and was caused by a failed defrost timer that was icing up the evaporator coils at the back of the freezer. A service call lasts about an hour including melting the ice with a heat gun..

I would seriously NOT recommend doing this! Trying to run a 110 volt appliance at 220 volts is too much power for the electrics inside the refrigerator (or any 110v appliance) to cope with. You will 'Fry' the electrics possibly even risking causing a fire. Do you have a model or serial number for this refrigerator? You might have to see if you can source one online and import it from the US. That could get expensive! A simple and obvious answer here if the part is so difficult to get, is to buy a whole new refrigerator. Compare the cost of both options as it may be cheaper to replace the whole appliance.

There are several causes for a refrigerator that doesn't cool, including dirty condenser coils, poor ventilation, improper installation, faulty or dirty gasket seals, unorganized food storage, appliance location and malfunctioning internal parts.

The solenoid has nothing to do with the crusher mechanism. Rather it delivers water to the ice tray when empty. Check that the ice door closes completely after ice is dispensed otherwise frost can build up in the crusher blades and prevent them from moving into position. Otherwise, check for a worn out part that connects to the blades and would prevent them from articulating.

Check the circuit board that controls the dispenser. Also, check the wiring and terminals on the control panel. Also, check ice size adjustment function.

Based on the information provided, there are several possible causes for the Jenn Air refrigerator not cooling enough. One possible cause is a damaged or clogged condenser coil. The condenser coil is responsible for releasing heat from the refrigerator, and if it is damaged or clogged, it can cause the refrigerator to not cool properly. Another possible cause is a malfunctioning compressor. The compressor is responsible for compressing the refrigerant and circulating it through the refrigerator's cooling system. If the compressor is not working properly, it can cause the refrigerator to not cool enough. Additionally, a refrigerant leak can also cause a refrigerator to not cool properly. It is also possible that pulling the fridge forward may have caused damage to the electrical wiring or components of the refrigerator, which could be causing it to trip the circuit multiple times per day. As for the ice maker, rust in the water supply line could indeed be causing clogs and preventing it from working properly. To determine the exact cause of the issue, it is recommended to contact a professional appliance repair service to diagnose and fix the problem.