Top 20
Konica Minolta bizhub C250 All-In-One Laser Printer Questions & Answers
I have a c252 Konica Minolta. The printing
Hello,
Check the ethernet cable. Using the cmd ping-t your copier ip adress and see if the printer comunicate with the network.
Here is a link with an example http://www.google.ro/search?q=ping+-to+ip+address&dcr=0&prmd=ivns&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjf9dLlmLbYAhWdF8AKHc1NB20Q_AUIBigB#mhpiv=1&spf=1514790114761
Minolta bizhub C250 is "offline" every time it rains/electricity
Does your copier have a good surge protector or is just plugged into the wall and not some 5 and dime surge protector ???? does the surge protector have the network cable protected to???? goods one will protect power fax and network. Why FTP (File Transport Protocol) File sharing Do you scan to one or to your computers and email????
Have a electrician come out place the copier on its own circuit. Btw, I’m available to help over the phone in case u need at
https://www.6ya.com/expert/normanj_7893313f0751935f
User Auth. for Mac on BizHub C250
setting up auth. on mac requires that you open the doc on appropriate app, on print menu select output method, set auth. credentials, and save. then print. some mac OSX ver. will save others won't. prompting you to set auth, every time you need printing.
Fuzzy printing
Try a reset to factory defaults. Or a hard reset. Or driver reinstall. If nothing works then you have a physical issue with unit.
What is error c2151?
Open the right side door. on the door you will see a sponge looking roller that roller is on the back side of the paper. On the front side is the Transfer belt which is inside the machine across from it when the cover is closed DO NOT TOUCH THE BELT THE SHINEY LOOKING THING THAT gets nicked or damaged you will see it on the print. Any way the code is for the sponge roller check and make sure it is installed properly, two levers at each end lock it in place. the whole assy. that the roller is on has a motor system that could also me a problem. If that roller is OK was it replaced when the belt was replaced? If not get a tech to look at it. Btw, I’m available to help over the phone in case u need at
https://www.6ya.com/expert/normanj_7893313f0751935f
Not finding what you are looking for?