20 Most Recent
Konica Minolta bizhub 350 All-In-One Laser Printer - Page 2 Questions & Answers
Black line across top of page
- Remove the toner cartridge.
- Get a paper towel or cotton swab.
- Clean off the glassy part of the toner by turning the gear on the side by hand while wiping the drum surface clean and remove any black lines of toner you see from the cartridge.
Konica Minolta C652 Fax/Scan Button and User Box Button
The hard drive is not turned on. enter service mode ( utility, meter count, details, stop, 0, 0, stop, 0, 1 - this should be pressed in exact succession) then go to system 2 and look for a place where it asks you about all the installed perifferals. Turn the hard drive setting on.
I have a new used
When you installed the driver did you check the boxes for the installed options? Plus you may have to check the box for saddle unit. Hope this helps.
Jagged edges and misregistration
What printer is it ? Some older ones need manual calibration, where patterns are printed, then you tell the system which is the best one. Newer ones can self calibrate, but still need it done. Go into your printers menu and see if you can find something on calibration or allignment.
Not finding what you are looking for?