20 Most Recent
Juki DNU-1541 Mechanical Sewing Machine - Page 5 Questions & Answers
My Juki started leaking oil up by the bobbing and won't sew. Lots of oil. Fairly new machine as far as usage goes.
Have you moved your sewing machine lately? I don't know what model your machine is, but I would imagine that you have an oil pan under the machine. If you have too much oil in the pan (there are marks on the pan indicating how full you should fill it), it might do this.
If you have moved it lately and tilted the machine, you may have two problems:
1.If you tilted it towards the bobbin, you might have oil dripping from all those parts and you will need to tilt the machine back and dry all the parts with a soft cloth until the excess is gone.
2. If you tilted it to the right, you may have oil on the belt and it is spinning out on a greasy belt. While your machine is tilted backwards, your belt should be loose and you can dry it will a clean rag. Take a flashlight and look down around your motor where your belt is attached and make sure that the cover over the belt isn't full of oil and contributing to the problem. (Dry it out with your rag also).
Good Luck!
Needle position adjusting dial not working
The needle, on the other hand, does not move in either direction, and the dial emits an audible beep beep noise, as if I had moved it too far in either direction . Because of this behavior, it appears as though I have gone beyond the dial's maximum adjustment range.
Juki 210d error 3
Hi
about error 3 please make sure first dc voltage comining fro power board to servo board check J8,J28, second encoder signal from the motor is not supplied check J2,J29, third check connection between main board and servo board J11,J1
best regards
ashraf
Juki TL 2010Q stopped sewing new out of box
Question moved from Cars and Trucks to Juki Sewing Machine.
I wonder if you mean 'sewing' rather than 'seeing'??
If it is new, did you read all the manual? Did you make sure the leads are nice and tight.
It is under warranty, contact seller or maker.
..
Not finding what you are looking for?