20 Most Recent Insignia IS-LCDTV32 32 in. Television - Page 4 Questions & Answers

If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magzine" will make surf easy Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Disassmble procedure to many popular brand TVs' are given with illustrations.

There is no link code for the TV. Simply connect the Roku to the TV with and HDMI cable and set up the Roku.

Check and replace damaged component/s at it main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ Details about how to check a remote control is given.

hi you could take the batteries out and short the metal prong together with a screwdriver the put the batteries back in hope it works regards shaun

Contact the authorized dealer for Insignia. Gopakumar Gopalan Google

An lcd tv has to have a light source behind it to see the picture. Older ones have flouresent tubes. Newer set have light emiting diodes(led). You need to determine if the backlight is turning off or is set loosing signal. If you press the menu button on the Insignia remote does the menu appear on the screen. If not hold a flashlight on the front of the screen. if you can slightly see some video the the back light is off. If the menu shows then check the signal source. If back light is out the replace the inverter board.

Try power cycling the TV. To do so, unplug everything from the back of it, power off the TV and unplug it from the wall. Leave it unplugged for a few minutes, and then re-connect and plug the TV back into the wall. Turn it on and reset any system setting changes back to factory defaults. If the problem(s) still exist(s), then I would recommend scheduling repair service.

Remote is broken. Buy a used remote from ebay.

It sounds that the back-light inverter section circuit to your TV is faulty. It is very difficult to predict which part is defective, as per your prescription here. It will be best to contact any service technician. If you wish to get some details, check the site linked here. Pull up older posts.

I would use M6 screws at least 15mm long.