20 Most Recent Zebra Z4Mplus Label Printer - Page 10 Questions & Answers


are they the same barcode type?
what is the font set at? using Arial or other fonts can make the software send a more complicated image. use the Zebra Triuverate font. this keeps it simple. also, do a print out of the settings on each printer and compare them line by line. change the settings to match the printer that is printing correctly.

Zebra Z4Mplus... | Answered on Sep 03, 2009


There is a pressure pin that may be out of center. open the head and verify that the pressure is correct and in center.

Zebra Z4Mplus... | Answered on Sep 01, 2009


Probably means that the board controlling the dispaly has gone bad. The only reset is in the menu so you would need to see the display or be able to connect the ZebraNet card if it has one attached.

Zebra Z4Mplus... | Answered on Jul 28, 2009


might need to adjust your printhead. Might have the temp set to high.

Zebra Z4Mplus... | Answered on Jul 10, 2009


download the current zebra driver- zdesigner from the website zebra.com click drivers and downloads then enter your model. you have something going wrong with the current driver you have and will have better luck with the current one.

Zebra Z4Mplus... | Answered on Jul 07, 2009


its the 2nd setting in the setup menu of your printer. ips = inches per second. 2-12 inches is the range. this setting is also in the driver under printing preferences and printing default and must be changed also or the next print will change the printer back.

Zebra Z4Mplus... | Answered on Jul 07, 2009


see nothing is imposible if u want u can do anything all u have to do is open google type your search item like download drivers for zebraz4Mplus-link and click on google search it will show you the list of available drivers choose what you want and just click on it and download it ok.

Zebra Z4Mplus... | Answered on Jul 07, 2009


You should make sure you have the label program set for the same size label you are printing and calibrate the printer before you start a roll.

Zebra Z4Mplus... | Answered on Jul 06, 2009


The print server has a web access if you know the IP address. You may need to have a Username (root) and password to gain access to what you wish to change.

Zebra Z4Mplus... | Answered on May 27, 2009


Reset it to factory default.

Zebra Z4Mplus... | Answered on May 21, 2009


The default password is 1234

Zebra Z4Mplus... | Answered on Apr 21, 2009


If the backing has black lines between labels, I would use the mark sensor. If the labels are not genuine Zebra, you will need to pay with the sensitivity of the sensor. To do this, you will need to http on to the printer and you will find the calibration options there. If it asks you for a password, this is 1234.

Zebra Z4Mplus... | Answered on Apr 02, 2009


The problem may be on the front control panel, review whether there are loose cables of the lcd display to the logic board.

Zebra Z4Mplus... | Answered on Mar 31, 2009


open the black cover of your ribbon storage..remove the soiled ribbon. locate the origin of the ribbon( do not pull the ribbon hard as if you don't mess the arrangement) follow the pattern that has an outer pathway located beside to your original hook of the ribbon then pull the ribbon out gently (just follow the arrows that is indicated on the case)

Zebra Z4Mplus... | Answered on Mar 30, 2009


with zebra printers for the most part, hold down the power switch for about 10 seconds when powering on.

Zebra Z4Mplus... | Answered on Mar 24, 2009


printer manufacturers has different standards depending from the varieties of model and brand of printers for example an epson printer model who is older version is not the same speed print with the recent model likewise with the other brand. Therefore calibration of labels is depending to the version of the printer you are using now.

Zebra Z4Mplus... | Answered on Mar 20, 2009


check the driver setting USE PRINTER CONFIGURATION

Zebra Z4Mplus... | Answered on Mar 20, 2009


go to printer driver properties.. 1.click printing preferences set it to USE PRINTER CONFIGURATION 2.go to advance click Printing Defaults set it to USE PRINTER CONFIGURATION
you must set this two configuration note: fresh installed driver defaulth to software control

Zebra Z4Mplus... | Answered on Mar 20, 2009


Here is a website to help with specs and supplies...

CLICK HERE

Zebra Z4Mplus... | Answered on Mar 16, 2009

Not finding what you are looking for?
Zebra Z4Mplus Label Printer Logo

285 questions posted

Ask a Question

Usually answered in minutes!

Top Zebra Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Zebra Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Z Zebra

  • Z Zebra

Most Popular Question

z4mplus doesnt recognize media label

  • Office Equipment & Supplies
Loading...