20 Most Recent Becker Silverstone 7860 6-Disc CD Changer - Page 9 Questions & Answers

follow this steps and fix it. God bless you Clean a DVD disc:

1. Hold the disc by its central hub and outside edge.
2. Blow dust from the bottom surface with a can of compressed air.
3. Clean dirt and fingerprints from the bottom surface with a lint-free cloth dampened with CD/DVD-cleaning fluid or denatured alcohol, wiping from the center outward.

Service a DVD player disc tray:

1. Open the housing by removing mounting screws and anything blocking the tray. Press the open/close control to the extend tray, then unplug the unit. To remove a clip-on tray front, brace the tray and slide the panel to one side.
2. Unplug cables between the front panel and the interior. Remove any screws securing the front panel and remove the panel. If it won't move, check beneath it for clips or additional screws.
3. Remove the hold-down on top of the disc tray and gently pull the tray out of the player. Clean the travel rail and guides with a swab dampened with denatured alcohol. Lubricate lightly with white lithium grease.

Remove the drive belt (using gloves or tweezers) to inspect for dirt, water, or damage. Clean with a lint-free cloth moistened with denatured alcohol. If the belt is damaged, replace it. Service a DVD tray motor:

1. Unplug the player and test the motor with multimeter
2. Unplug the motor plug and spray it with electrical contact cleaner, then plug it back in.
3. To remove the motor, unscrew or depress the end of each bale and lift out the motor. Replace the motor if necessary.

Clean the objective lens:

1. Remove the housing and lift the hold-down clamp to expose the lens.

Remove dust with canned air or soft brush. If needed, use a foam swab or a camera-lens tissue dampened with lens fluid.

i got mercedes c180 i cant find cd changer inside my car

1998 porchea boxter cdc-3 cd changer, The cd changer keeps on changing tracks as if their are no cd's in the changer. keeps going from 1 to 6 and then changes to radio.

your code is 56626

not sure what caused it to go haywire, likely something to do with the bluetooth. be that as it may you need to pull the fuse for the radio for about 20 minutes to reset it. if you can't locate the fuse for the radio just unhook the battery for that length of time. be aware that if that radio requires a code you need to know it and how to enter it before you attempt to reset it.

On the face of the stereo is a * button. Push this button then use the numbers on the face of the stereo to go directly to that station. Example, my favorite classical station is 90.7. Push the * then 907. This station will appear in display. Then push and hold for about 5 seconds the preset button you would like this station to be. The stereo will momentarily blink to a different station then come back. Station set.

The radio code is a security feature that's meant to deter theft, and it's unique to each vehicle. If you've lost your code, you'll need to contact a Nissan dealership or service center and provide proof of ownership. They should be able to help you retrieve the code. Please do not attempt to use codes from the internet as incorrect attempts may lock your radio.

How to change language to english for Honda Odyssey 2021 Gathers Radio Player

I have the same radio now with no Bluetooth am trying to get Bluetooth on it too without having to buy another radio. Please help.

First thing to do is check to make sure that the batteries are properly charged.

Second, make sure that you have a clear line-of-site to the IR transmitter. Infrared (IR) works the same way that your TVs remote control works - if the signal is blocked, then you will not hear any sound.

Third, make sure that you are in the rear seat of the vehicle when listening to the sound. The IR transmitter only transmits to the rear seat, so you will not hear any sound if you are sitting in the front seats. This is a common problem that i see.

Lastly, make sure that the heapdhones you purchased are compatible with your 2006 2007 2008 2009 or 2010 Toyota Sienna. Remember that some older models require RF headphones, not IR headphones. I checked http://www.audiovideo2go.com for compatibility before I purchased my headphones. They have a useful listing of all the headphones and models of vehicles they are compatible with.

'make model (what is is)' as first 3 words in all questions. https://www.google.com/search?q=demo+mode+the+code+for+4.91 ..

Unfortunately, no one knows or is telling. Companies rarely state power in RMS because Peak Power is a much more impressive. 1000 watt amp, 200 watts RMS x 2 channels at 8 ohms. Look for a sticker on the unit. https://www.google.com/search?q=Xplore+Amp+5553 ..