20 Most Recent
Samsung SMT-190 19" Flat Panel TFT LCD Security Monitor - Page 2 Questions & Answers
Smt 190 dx won't turn
Processor could have some garbage in it to to the power surge and if you unplug the set from the wall for 40Min., it will rest back to normal.
My screen saver comes on in a few seconds when i
The screen saver is on the remote and the monitor just push the button on the remote or the monitor. This screen saver don't
work like a computer screen saver .When you hit the button it
Go off. hit it again it's On. If you push the button it should go on if not then something else is wrong. I know this for sure.If your screen is black all the time most likey the Inverter Board or the
Power Supply Board is bad. Hope this points you in the right direction
Forgot password to Samsung SMT-190DN
Hold the remote control's STOP ( ) button for
longer than 5 seconds. “INITIAL” appears on the display and
all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Won't power on just beeps
If it beeps it might be on. The beeping might be that your hard drive is full
What you can do is ,,, Do you have a 19'' tv ??? ON the back of the Monitor look for the
Video out /on the 19'' TV look for Video in... run a video cable to monitor and the TV
Turn the TV on then the SMT-190 Monitor wait till it sets up takes a few minutes
GOOD LUCK
Purchased the Samsung SMT-190DN a year ago and
This seems to happen to a lot of then Either the Inverter Board is bad or the power supply board is bad. Good luck getting it fixed. Samsung seems not to even think they made them.
I emailed all over trying to get mine fixed with no luck. Do you mean the 7 day of recording,this will record til the day you turned it off YES!! even with the screen black it records DO THIS!!!
First... On the back of the monitor look for VIDEO OUT Its down near the Camera wires
Do you have a set of VIDEO and AUDIO cables there red, white,&yellow????
Get a 19'' tv with video and audio INPUTs NOW!! with the RED cable hook it to the Monitor Video out and the other red end to the tv Video in Just the RED ONE don't worry about white or yellow.
NOW turn the Security Monitor ON , NOW the TV let them warm up The tv must be in Video1 or
Video 2 ---NOW YOU SHOULD SEE THE CAMERA's or the screen POINT the remote at the monitor to do things like menu, search. Sorry I'm not to good at explaining things THIS Should work GOOD LUCK
My system goes to screen
RIGHT CLICK ON MAIN SCREEN
SELECT PROPERTIES IN THE CONTEXT MENU
NOW SELECT SCREEN SAVER TAB
INCREASE TIME AS YOU WISH
YOU CAN TURN IT OFF TOO BY SELECTING NONE IN THE SCREEN SAVER DROP DOWN BOX
VOTE ME
How do I copy an event onto a flash drive or DVD
Push menu...Archive setup....put a usb flash drive in port on dvr.....turn archive enable(on)-will say wait then turn to on...set date, time, cammera/channel, you want to save to flash drive...(Make sure you have this info all found before you get to this) ....Archive unit,set 1,2 or 3 mb the size you want saved(3 is the highest).... Skip Archive format(leave off)...select archive start-(in just a second it will say back up done).........It will download the video segment you chose and a copy of the simple viewer.....double click the viewer and load on your computer, and use that to view the video.....very easy once you do it, hardest part is to get the video segment lined up with the date,time etc...so all the clip gets recorded at the same time......Hope this helps...
Not finding what you are looking for?