Samsung SMT-190 19" Flat Panel TFT LCD Security Monitor - Answered Questions & Fixed issues

See this site... http://www.howtogeek.com/130611/how-to-factory-reset-your-android-phone-or-tablet-when-it-wont-boot/

Have you forgotten your mobile password? Try default security code for your mobile. It doesn't work simply reset your mobile. You can easily reset your mobile by using master reset code. If you need master reset code you can visit this site Unlock-free.com here you can get the code and reset your mobile easily. Unlock-Free.com

philips 26pf3321 sound ok back light ok but picture no

Needs Capacitor replacement. Open the LCD and check / replace leaking caps.

212zgy789

Have you tried unplugging the monitor from the 120 volt supply for a minute or two then replug and turn on. Like computers and some flat panel TVs they can freeze-up after an unplanned power loss and need rebooting

Press CH2 and Alarm buttons on monitor at same time and hold for a few seconds...goes to factory reset.

Sounds like what we had once with our Samsung TV.40"(The TV clicked a lot and more and more often before it came on)The service man soldered in a part into the internal power supply.So you have to bring it in, I guess.Another idea: the cable is not plugged in right and came loose, so check that, on both ends.

Look at the manual to set up. You must set that up with your modemand R-45 cable from the router to the unit the networt cable. then you must set your router to port forwarding. Its not that easy

Don't understand the Question, The channels are your Camera's

Dont have a solution, mine has done the same thing. Anybody have an answer?

This model, SMT-190?http://www.samsung.com/ca/support/detail/supportPrdDetail.do?menu=SP09&prd_ia_cd=&prd_mdl_cd=&prd_mdl_name=SMT-190DN

If you did a successful reset the factory default setting is Logoin: ADMIN Password: 4321

It does the same when it is used with another system?
Not likely that it goes into sleep mode, more liekly to go into safety shutdown mode due to shorted cicuits, or bad DC in the power supply due to bad DC filter caps as you can see in y example of failed SAMSUNG TV's and Monitors.
http://s807.photobucket.com/albums/yy352/budm/SAMSUNG/

Basic LCD monitor and TV troubleshooting guide: http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide http://www.fixya.com/support/r7406380-tv_training_manuals Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you. Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

Hello.It can be one of two things:1. A power issue2. A firmware issue1. In the first case the one thing you can do is to power off the device, unplug it, wait about 5 minutes and then press and hold the power button for 20 seconds with the cord unplugged. This way you will deplete the capacitors in the power section of the device. If that doesn't work it's most likely the internal power transformer or one of the capacitors is toasted. In this case you must go to pt. 2.2. In the second case you can't personally do anything because you must address the issue to a certified Samsung service provider in order to examine the issue and perform the firmware rewrite or the intervention needed to repair the device.Hope this helps, keep me update please,Vlad Mototolea

There is a fuse on the Power Supply Board replace that. Hope this helps

Processor could have some garbage in it to to the power surge and if you unplug the set from the wall for 40Min., it will rest back to normal.

More then likey yuor Inverior Board is going bad if not that, Its the Power Board
First check Invertor This Happens a lot Its hard to find someone to fix it.
Well I had a hard time. I just waited and bought one for parts and fixed it Myself
Good luck
PS. You can still use it just get a different Monitor. The Video out on the Samsung to the
Video in on a different Monitor IT WILL WORK

Master Reset or Factory Reset

When Factory Reset is performed, the setup value will factory default setting
When initialization starts.

1.Select System Setup from Menu Screen.
2.From the System setup submenu, Set Factory Reset to ON
3.When you exit Menu, The phrase FACTORY RESET Appears on the monitor and
The Initialization starts.{ON/OFF} Use arrows UP-- DOWN & , kEY TO MAKE CHANGES
HOPE THIS HELPS

http:/www.samsungcctvusa.com/files/upload%5Bmanual%5D%20SMT-190DN.pdf


I Hope this will give you the Manual