20 Most Recent
Ricoh Aficio CL3500N Laser Printer - Page 3 Questions & Answers
Faint Black Lines
Hi best way to check is to remove the black photoconductor and you should be able to see the little lines on it also check the the black dev/toner unit for the lines. most likely to be the black photoconductor unit though.
Thanks J
Error sc 542
Fuser fault code will need to either have a tech look at it or buy a new fuser after installing will need to rest code
Printer creates 2 inch diagonal lines that
Sounds like a bad fuser belt. You can check this by removing the fusing unit. Open the front door. Unplug the connector on the upper left side. Then release the 2 green clips that are next to the blue B1 levers. Pull out the fusing unit and look at the black fuser belt. If needed you can turn the belt by turning the gear one the left side of the unit. I'm sure you wull see the same "defect" in the belt that you are seeing on your printed pages.
Not finding what you are looking for?