20 Most Recent
Maytag MGC6430 Gas Cooktop - Page 5 Questions & Answers
MY ELECTRIC RANGE KEEPS NEEDING TO BE RESET. iS IT A PART SHORTING OUT OR IS IT THE WRONG AMPERAGE FOR THE OUTLET?
It depends on several factors. First, I'll assume when you "reset" the range, you are resetting the circuit breaker (cb) in the cb panel.
If this is the case then there are two possible causes. 1. The cb is old and worn out. So replace it. 2. There is an occasional overload of the circuit. This causes the cb to trip. For that you will need a qualified electrician to determine what is causing the overload. WARNING!!! Ranges are typically 220 Volts which can kill a person. So leave this up to the pros. Do Not attempt to do this work yourself.
6/29/2021 11:49:00 PM •
Cooktops
•
Answered
on Jun 29, 2021
Omega ceramic cooktop error code F
GOOGLE KNOWS check link below
https://www.google.com/search?q=Omega+ceramic+cooktop+error+code+F&oq=Omega+ceramic+cooktop+error+code+F&aqs=chrome..69i57&sourceid=chrome&ie=UTF-8
4/18/2021 2:45:20 PM •
Cooktops
•
Answered
on Apr 18, 2021
Eo1 code on a scott omcan induction cooktop
Try this
- Error code E01 showing on display
- What causes an E01 error code on the CT Electric Cooktop control panel?
- CT E01
STEPS TO VERIFY ISSUE:
Turn the home circuit breaker to the unit off for 30 seconds then back on again. Then retest the unit operation.Or contact the maker direct. They are expensive units and in my experience, if you get 2 years out of them in a commercial setting, you are lucky!
INDUCTION COOKERS - Omcan
omcan.com > ... > INDUCTION COOKERS
INDUCTION COOKERS. Home FOOD EQUIPMENTCOOKING EQUIPMENTINDUCTION COOKERS. Name, Date, Price (ASC), Price (DESC), Item Number.
3/11/2021 6:59:37 PM •
Cooktops
•
Answered
on Mar 11, 2021
Cooktop knobs will not turn. i tried lubricating the shafts with WD 40. no luck. any other suggestions?
WD40 is a Water Displacement (formula 40) spray. You do not need to displace water. Also when it fully dries, it leaves a waxy film to further shed WATER. People use it for everything, it smalls nice, but it was made for one thing only.
Electric or gas cooktop?
Gas have a safety feature, push in and turn, some have an electric lock.
Just sticky, or corroded, use Plus Gas, or some type of penetrating oil.
Did they work before or is this cook top new to you?
Did you read the instructions?
11/18/2020 6:41:24 PM •
Cooktops
•
Answered
on Nov 18, 2020
I have noticed there's quite a mark up on gas cooktop stove parts, specifically Jen air model number CVGX2423B. I need to replace the valves.
Sorry I am unable to comment on your specific problem, I just wanted to remark that it is the usual practice with bought-in parts whereas those parts manufactured in-house tend to be more reasonably priced.
Often it seems the price of bought-in parts double as soon as they arrive and then repackaging cost is added and then a notional amount of extra profit added for good measure...
Sometimes, when a component bears the name or the logo of the original manufacturer, it is possible to source replacements from that company resulting in a considerable saving. Several times I have managed to do this and once the saving was an incredible amount. The appliance manufacturer wanted £65 plus carriage and tax but the component manufacturer sold me the part for a total cost of £16.60.
11/2/2020 4:33:05 PM •
Cooktops
•
Answered
on Nov 02, 2020
Not finding what you are looking for?