20 Most Recent Canon PIXMA MP830 All-In-One InkJet Printer Questions & Answers

2 Answers

First start up of the day error code u140

said error 6A00 CODE

Canon PIXMA... | Answered on Sep 25, 2019

4 Answers

Canon MP830 Service Error 6000

Canon PIXMA MP830 all-in-one Inkjet Printer
Error code 5C10 on computor screen and on the printer it says 6A00

Canon PIXMA... | Answered on Aug 19, 2019

1 Answer

Error code 6A00

Hi
Error 6A00
The 6A00 is a Canon generic code for paper path jam.

Solution 1:
Move the printhead carriage back and forth a few times.

Solution 2:
Check the purge unit: Moving the print head assembly will not clear a purge unit if its jammed with paper, paper clips, push pins, screws, cookie crisp, flower bud pods or the like.

Solution 3:
Press the ink pads down in the purge unit.

All The Best: Pineworks

Canon PIXMA... | Answered on May 16, 2019

1 Answer

My Canon MP520 display screen is alight but blank

I had this problem too and I discovered that there is a sort of switch in the display lid that malfunctions. It is probably there to switch off the display if you close the lid while the printer is on.

The solution is to open the lid just enough to reach the on/off switch and turn the printer on. If you now open the lid fully the display is up and running like you were used to.

Canon PIXMA... | Answered on Feb 12, 2019

6 Answers

'unable to save file. the system cannot find the path specified'

Had this same problem and just fixed it. You need to actually change the button settings in Navigator. Open MP navigator and choose One-Click, then click Button Settings. You can choose a new save destination from here. Even though you are using the software instead of the button on the device, it works.

Canon PIXMA... | Answered on Jan 09, 2019

4 Answers

Canon MP830

When i am trying to fax a document it is saying that the memory is full. But when i go to the menu and to fax memory it is saying empty. How to solve this problem

Canon PIXMA... | Answered on Sep 27, 2018

1 Answer

How to reset waste counter ink canon pixma E500?

Plug the cable, push stop/reset then push power button. Still Hold power button, then press stop/reset 5 times then release. You now enter in service mode. Then run Canon service tool v.3.400

Canon PIXMA... | Answered on Sep 20, 2018

1 Answer

What does canon pixma mp830 error code 6000 mean?

That is a line feed error (6000) It also should be flashing 3 times for this error on the on/off button.
This could be
1. Timing sensor unit QM2-2683
2. Timing **** disk film QC1-6229
3. Feed roller ***'y QL2-0925
4. Platten unit QM2-2923
5. Logic board ***'y QM2-3078
6. Paper feed motor QK1-1502

Canon PIXMA... | Answered on Mar 25, 2018

0 Answers

Tengo un problema con un

Canon PIXMA... | Posted on Mar 03, 2018 | Be the first to answer

1 Answer

Canon MP830 will not print. Makes all the

Hi . That problem is the print head. Is defective. Buy a continuous ink system printer. Is more efficient

Canon PIXMA... | Answered on Feb 11, 2018

1 Answer

My Canon MP830 printer has

Canon Error Code 6A00Printer Repair

Canon PIXMA... | Answered on Jan 27, 2018

0 Answers

Canon MP830 Error Message: Rear Cover paper jam.

Canon PIXMA... | Posted on Dec 15, 2017 | Be the first to answer

1 Answer

Hi, please help me solve my problem.

Did it finish maintenance before you reboot?

Canon PIXMA... | Answered on Dec 15, 2017

0 Answers

MP 892 MP navigator cannot communicate with the printer or scanner

Canon PIXMA... | Posted on Dec 12, 2017 | Be the first to answer

1 Answer

Why is my Canon Pixma 830 Printer beeping once upon start up, the screen lights for a second then the printer shuts off?

Either a power supply fault or there is a fault in the main circuit board. You may find a replacement power unit (they are held in by two clips ) at an electronics recycler or auction site like e-bay, but the main board is not an available part.

Canon PIXMA... | Answered on Dec 11, 2017

1 Answer

Canon MP830 wont scan.

hi Jackelle21.
i have had a look around the internet and all i can find out from going into forums is that the problem might be because you need to download what they are calling (mp navigator)
so not sure if this is what you have to do.but if you go to this link you will see download sites to where you can get it.

mp navigator download Google Search
or this one.
Canon MP Navigator EX

Canon PIXMA... | Answered on Nov 27, 2017

1 Answer