20 Most Recent
Maytag MAH2400A Front Load Washer - Page 2 Questions & Answers
My maytag mah2400aww stop on 55min why
On what cycle is this happening or is it on all the cycles? I would shut the washer, then I would run the diagnostic first. If it does not give you what the problem is, I would then check to see if it will spin and drain. This might be the problem, it is not able to spin. this was my problem. I was told to replace the electronic board, but that was not right, I had to replace the motor, I have to look it up for you, but it was quite simple after my son and I figured out how to take the back off. The part was 265.00, but quite cheap compared to the fact we didn't need a repairman. I believe I had caused my problem by overloading the machine, which I never do again.
check to see if it will spin first, run diagnostic testing then get back to me I will try to help you..
Maytag 2400aaww Front loader had ND code. Want to
ND means no drain, the water level fails to drop below the low water level in final spin.check for1 restricted drain system.2 kinked/plugged drain hose or pump3 faulty pump4 loose connections on the board or pumpif you find none of the above you have a faulty control board.hopefully you just find something clogging the pump, remove the pump completely and make sure it is not a paperclip or something like that down in the pump jamming it up so it doesn't drain, be careful and get lots of towels because there will be water in pump system.
Here is the board to order in case you find that it is the problem.
ND Error code
Error code "nd" means it is not draining. Click on this link to get the user manual:
http://laundry.manualsonline.com/manuals/mfg/maytag/mah24.html
Then click on "GET THIS MANUAL" to download the manual.
Not draining can be caused by the controller, pump, solenoid valve, or clogged drain.
If this information was useful, please select YES to the first to rating questios. Good Luck and thank you!
Not finding what you are looking for?