it sounds like there is something stuck in the water pump you will need to lay the water outlet on the floor into a shallow vessal to empty it then that the back off locate the water pump and see if you can rotate the cooling propeller if not take the motor housing apart to remove the debris that's preventing it from turning if the motor has not burnt out eric

Maytag Atlantis... | Answered on Jan 01, 2018

0 Answers

We have a Maytag Atlantis washing machine in which sometimes black flecks seem to come from the lining of the tub and get on clothes. I will run dishcloth as far in between tub and wal and get out as

Maytag Atlantis... | Posted on Dec 04, 2017 | Be the first to answer

0 Answers

Maytag Centenial - Won't spin unless I lift and lower the lid.

Maytag Atlantis... | Posted on Nov 09, 2017 | Be the first to answer

1 Answer

I have a Maytag Atlantis

Hi Greg.
this is all i could find,go to this link and see if it helps you out.
Maytag Atlantis washer Model MAVT754EWW how to clean the hose Screens that...

Maytag Atlantis... | Answered on Nov 04, 2017

1 Answer

Maytag spins but makes clunking noise and clothes are still wet

The model number would help, ya know?

Maytag Atlantis... | Answered on Oct 03, 2017

1 Answer

When my Maytag MAV-12 Washer stops spinning, it

I would not fix it myself .

Maytag Atlantis... | Answered on Aug 23, 2017

0 Answers

I have a maytag top

Press 2 metal tabs. About 6" from the sides on the front of washer. Plastic ring on top has tabs that need to be disengaged to disconnect the ring. Once ring has been removed the area between the plastic tub & metal tub is accessible. Check for small articles of clothing, like socks or underwear. Inner tub can be removed by: snap up plastic cap (small slot for tool to slip in and pop up). Remove 7/16 nut and remove agitator (may require to be rocked back & forth, sits on a splined shaft). Remove 5 small phillips screws, being careful not to drop any, and pull inner metal tub up (may require it being shimmied back and forth). Removing this tub will give full access to any debris or articles of clothing that may be under it. Please keep in mind that if you're challenged in reassembly

Maytag Atlantis... | Answered on Jun 16, 2017

1 Answer

Leaking drum on maytag washer.

Go to www.repairclinic.com and enter MAV6000. With luck, you will be presented with a list of common replacement parts and may be able to view a generic Maytag video showing disassembly and replacement.

Maytag Atlantis... | Answered on May 24, 2017

0 Answers

My washer is full of water but will not start

Maytag Atlantis... | Posted on May 23, 2017 | Be the first to answer

0 Answers

I have a Alantis Maytag washer model MAV6200AWW

Maytag Atlantis... | Posted on May 10, 2017 | Be the first to answer

1 Answer

My Maytag MAV6000 washer leaks intermittently. In

Realistically, a 10-year old Maytag is nearing the end of its usual life. The pump may be leaking at random times during a wash cycle. If you put 50% of the cost of a new one into repairs, it is time to thing seriously about replacement of the machine.

Maytag Atlantis... | Answered on Apr 26, 2017

0 Answers