20 Most Recent
- Page 4 Questions & Answers
Out of balance problems
hi, it sounds like one of the springs has come off removethe lid to check, then check the ones on the bottom of the drum, not all machine have springs on the bottom the have shock absorbers but these can fail aswell
on Dec 05, 2012
Maytag pav2300aww wont spin
Does it agitate for the wash cycle?
When you get to the spin cycle, is the motor running and 3 pulleys underneath turning, and the tub is not turning?
If so, I had this issue with this model. The brake would not release, and I had to "persuade" it. Also, I had to set the plastic cam correctly on the bottom of the unit to that is would engage and release the brake at the proper points.
Did not need a bearing kit, just had adjust a few things that got knocked around by the movers. Only took me 6 frustrating hours. Hopefully take you less than 1. BEWARE the 200# force for the spring!
Cost $0. Mental anguish = still tabulating.
on Nov 10, 2012
Not finding what you are looking for?