Error code 08 in a Kyocera FS-1020MFP printer is a communication error and can be resolved by trying the following steps:
Check the cable connections: Make sure that the cable connections between the printer and computer are secure and properly connected.
Restart the printer: Turn off the printer and then turn it back on. This can often resolve communication errors.
Try a different cable: If the error persists, try using a different cable to connect the printer to the computer.
Update the printer driver: Make sure that you have the latest printer driver installed on your computer. You can download the latest driver from the Kyocera website.
Reset the printer: Perform a reset on the printer by unplugging it from the power source for a few minutes and then plugging it back in.
Check the computer's firewall settings: If the error persists, check the firewall settings on your computer to make sure that it is not blocking communication with the printer.
Contact Kyocera support: If the error continues to persist, contact Kyocera support for further assistance. They will be able to provide more specific guidance for resolving the error.
The "System Error F375" message on a Kyocera Taskalfa 266ci copier/printer is indicating a problem with the finisher.
Here are a few steps you can try to troubleshoot the problem:
Check the finisher: Make sure that the finisher is properly attached and that there are no loose or damaged connections.
Check the finisher settings: Make sure that the finisher settings are correct and that the finisher is not in an error state.
Check the finisher paper tray: Make sure that the finisher paper tray is not full or jammed.
Check the finisher gears: Make sure that the finisher gears are not jammed or damaged.
Check the finisher motor: Make sure that the finisher motor is working properly.
Consult the manual: Consult the manual for specific troubleshoot and service information for your Kyocera Taskalfa 266ci model.
The problem of image fading in some lines on a Kyocera3050 printer could be caused by several factors. Here are a few troubleshooting steps that can be taken to resolve the issue:
Check the toner level: Make sure that the toner cartridge is properly installed and that there is enough toner in it. Low toner levels can cause image fading or streaking.
Clean the printer: Clean the drum unit, the corona wire, and the primary charge roller. Dust and debris can accumulate on these parts, which can cause image fading.
Check the drum unit: Make sure that the drum unit is properly installed and that there are no signs of damage or wear. If the drum unit is damaged, it will need to be replaced.
Check the corona wire: Make sure that the corona wire is clean and free of debris. If the corona wire is dirty, it can cause image fading. Clean the corona wire with a lint-free cloth or a foam swab.
Check the primary charge roller: Make sure that the primary charge roller is clean and free of debris. If the primary charge roller is dirty, it can cause image fading. Clean the primary charge roller with a lint-free cloth or a foam swab.
Check the fuser: Make sure that the fuser is properly installed and that there are no signs of damage or wear. If the fuser is damaged, it will need to be replaced.
If after trying the above steps, the problem persists, it's recommended to contact the manufacturer for further assistance or to contact a professional technician for repair.
Check the cover switch: Make sure that the cover switch is securely in place and that it's not loose or damaged.
Clean the cover switch: Use a clean, dry cloth to wipe down the cover switch. Make sure to remove any dust or debris that may have accumulated on the switch.
Check the control board: Make sure that the control board is securely connected and that it's not loose or damaged.
Update the firmware: Make sure that your printer has the latest firmware update. Firmware updates may include bug fixes or improvements that can resolve unexpected shutdown issues.
Check for any jammed paper: Make sure that there's no paper jammed inside the printer. If you find any jammed paper, remove it carefully.
There is a cleaner system that is supposed to pick up leaking toner from the cartridge. Try cleaning the toner contacts on the machine and also on the toner cartridge itself. Use metal polish and then an alcohol swab. If that doesn't work, call for service. I had similar on a commercial machine and it needed a part.
https://www.google.com/search?q=Kyocera+Ecosys+M6235cidn+prints+blue+speckles
..
Hi
if your printer has a nozzle head, please clean that first. You should also check that you ink cartridges are not third party. If so, please switch to kyocera brand.
Thank you.
Hi,
please restart both your printer and the source that you're printing from (ie computer) before trying to print again. Also, please attempt to use another flash drive to print to the printer as well. If possible, you can update the firmware of your printer to make sure that everything is updated on the machine.
Thank you.
Hi,
Please use the pictures in your manual to locate and press the reset button in order to factory reset your laser printer.
You can verify this procedure on page 8-9 of the device manual.
Thank you.
Hello, let me hope your doing fine sorry about the machine problem did you tried to change any board please
Am suspecting the problem is on those board try to check the connections of the cables and EEPROM
The problem is the main board is faulty or it needs to be upgrading its firmware mostly likely it got affected by the power
try out this:
Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Operation PWB and engine PWB (YC17)
Defective main PWB. Turn the main power switch off/on to restart the machine. If the error is not resolved, replace main PWB.
Defective operation PWB. Replace the operation PWB
First of all try clean the slit glass with wet towel if the lines persist
change the slit of that machine if still remains the same check the optics and clean the exposure lamp.
thanks