20 Most Recent
HP LaserJet 3050 All-In-One Printer - Page 9 Questions & Answers
How can i set my printer to my roter
This is non network printer, you can't print just like a network printer , but you can install the printer in local system and share it & install the drivers in desired systems through local system where printer was connected. It will work like a network printer but scanning is not possible to other systems except local system.And one more drawback is your won't get print, if local system is switched off..
HP laserjet 3050-Not able to print and only
There are sensors in a printer and it sounds like the sensor is not recognized. You can place the printer in service mode and test the trays and all hardware components for exact cause. This is a common error.
Color laser jet 2840 is
I had a similiar problem and was using Windows Vista which was not compatible with the XP Installation package. The onboard drivers would not work either. Check to see if your printer is compatible with your version of windows.
I purchased a HP LaserJet 3050
The instruction to use scanner in HP Laserjet 3050
Click Start, click All Programs or Programs, and then click HP. Click HP LaserJet
3050/3052/3055/3090 all-in-one, and then click Scan.
Click Setup.
Select Change the destinations that show up on the all-in-one control panel when I press
the Scan To button, and click Next.
Select Allow me to scan by pressing the Scan To button on the all-in-one....
Move the destinations from the PC window to the All-in-one window.
Click Update. See the online User Guide for complete information
Source : Manual for HP Laserjet 3050
Thanks for using Fixya
SAM ANDERSON
My printer will not print - Windows 7 says "toner
Please follow the following steps.
1) Turn off the printer.
2) Shutdown the PC to which the printer is connected.
3) Remove the USB/Serial cable through which the printer is
connected to the PC and reconnect it back and replace the old cartridges with new ones.
4) Now switch ON the PC(only PC and not the printer)
5) Let the PC boot up and login to windows.
6) Now switch on the printer, PC should detect the printer
automatically now.
Now you
will be able to print.
My printer has an error "no print cartridge?
> Switch off the machine, remove power cord,> remove right,left & back doors,> see the snap shot observe sensor & spring> clean the sensor from dust > check spring dislocated? fix it properly, ensure that sensor flag maintain its home position> insert/remove cartridge,observe sensor flag moving properly > Power on the machine, check.. OK?,
I need to change the region on my HP Deskjet 3050
Press MENU and then press 2.Press < or > to select LOCATION, then press 'check mark'Press < or > until correct LOCATION appears. Then press 'check mark'Press 1 to confirm. The printer will now power cycle.
Hp laserJet 3050 fax pulls all the pages at one
The 'separation pad' needs to be cleaned or replaced. It's a small rectangle piece of rubber at the entrance to the automatic document feeder(ADF). It should be just under the feed roller.A drop of isopropol alcohol on a lint free cloth should work.
Need to set country on HP 3050 printer
1. Press MENU and then press 2.2. Press < or > to select Location and then press "check mark".3. Press < or > until the correct location appears.4. When the correct location appears, press "Check Mark". Press 1 to confirm. The all-in-one automatically turns itself off and then on after the setting is confirmed.
HP Laserjet 3050 No paper pickup
My printer now spits out the paper all over the place and jams up all the time. Did not happen when I first got my 3050 a few months ago.
It wont scan or copy without being very dark,
Detach optical scanner cable,belt take out scan assm (which is moving while scanning), hold it carefully, remove choke board(A small board under the unit to supply the power to florescent lamp), remove the upper cover, clean reflecting glasses fixes in the unit with ear buds gently, fix it back carefully, check,..see the snap shot of ccd..
Not finding what you are looking for?