Top 20 HP LaserJet 3050 All-In-One Printer Questions & Answers

No PC model stated no OS stated (opr. system) windows 10? we can not help you, ever lacking key facts why not go to your HP support page and load all software Related to Laserjet 3050 here https://support.hp.com/us-en/drivers/selfservice/hp-laserjet-3050-all-in-one-printer/1140783/model/1140778

that printer is not compatible with xp,you need to upgrade to at least windows 8

If the same fault occurs with different printers it is almost certainly caused by the document. "...second envelope from same document" suggests you are using a mail-merger. Is that right? What happens if you start again from scratch? Mke a new document and try to print it a a single entity, without using mail merge?

Ensure that telephone line connector inserted in line in port(other than telephone symbol port) In fax settings.. select automatic in answer mode select ring to answer as 5 rings select ring mode as all rings(single,double & triple rings) try for incoming fax.

You do not lubricate rollers directly. You lubricate the gears driving the rollers. I generally use white lithium grease.

no i think you need to replace toner cartridge with new good one

I would try to clean the adf scanning glass. Check for small fine lines on the glass and use a soft rag with a small amount of isoproplyl alcohol.

Please lift the document feeder and clean the scanning glass.

you mean the ADF unit , for sure but what about it ? i mean whats your question

Hi Use a Normal TWIN driver that appears in any software that allows you to scan or in Windows click on Start, Device and Printers, Select your HP3055 and SCAN

Most 50 errors will require the fuser to be replaced.

I think that this is a driver setting issue. my guess would be to disable duplex printing. If I am not mistaken the HP 3050 is an OfficeJet not a LaserJet. you might get a better response if you were in the correct printer catigory.

Why do you want to locate the fuse? If the fuse is bad your whole unit might not work at all. It sounds more like a pull-through-paper issue; something is making the printer stop in mid-feeding because it senses that something is wrong with either what is being printed on, or the feeder mechanics need adjustment.

please see the exit sensor its broken or displace

Before selecting the ring to answer, under stand what it is.. Press Menu button, scroll to fax set up with help of arrow keys, press ok button, scroll to answering mode. Select desired "auto, manual, fax & tele/fax. What are these? Auto: Auto aromatically tele mode will coverts in to fax mode irrespective of selected ring count. suppose if ring count selected as 4, printer will ring 4 times then stops ringing & converts in to fax mode. It doesn't matter whether it's telephone or fax. Manual: Printer always telephone mode. To convert in to fax mode, need to press fax button while ringing. Tele/Fax: Printer detects the incoming call type as tele(analog)or fax(digital) accordingly its will act. If its fax , line converts in fax mode with out any ring(silent detection), prints the received fax.If its telephone,printer rings as tele phone. * In auto mode only you need to select desired ring to answer(2-6 rings) There fore first you need to select "auto"mode, then scroll to ring to answer, press ok then select desired ring count, press ok to confirm..

I went online and found the HP8600 user manual and this is their solution to the error code 363 that you reported, which I copied off their site. Hope this works for you:

• Turn Error Correction Mode (ECM) off, if you encounter the same error repeatedly. Click this link HP All-in-One and Fax Products for more information on enabling or disabling ECM.

  

  NOTE: Error codes that apply specifically to ECM have ECM listed next to them.

Error Code: 356, 357, 358, 359, 360, 361, 362 ECM, 363 ECM, 364 ECM, 365 ECM, 366 ECM

Definitions

• The remote user pressed the Stop key, causing the session to be terminated.
• The remote machine encountered a system problem such as no paper or a paper jam. This prevented the fax from receiving any more pages, and caused it to terminate the session prematurely.
• The call-waiting service can cause this error. The click, heard for an incoming call, is actually a momentary disconnect of the line.
• The remote machine encountered an incompatible feature causing it to terminate the session.

Solutions

• Configure the remote machine for document reception by clearing any paper jams, loading sufficient paper, and clearing any other error messages.
• Configure the local fax machine to use a slower reception speed.
• Enable or disable the ECM setting.

Best method, plug in network cable in power off condition., Powerit & take configuration page., chk ip address in it., if its matches 2 ur system ip family, map in drivers or else change ip address in printer through menu settings..

Yes U can, just use the buttons on front face.

If you are trying to install the printer without a disk, then you are in luck (if you use Windows). HP printer drivers (and most other national brands) are pre-installed in the operating system. Set up the printer, plug it into the computer and then turn on the printer. You should get a pop-up on your computer that says it has a new device. It will automatically try to determine what the device is and then load that driver. It only takes a couple of minutes. If you have trouble or don't use Windows, you can go to hp.com and find driver downloads there.

Ans. No