Error 1203
is an issue that occurs either when a cartridge is bad
or the printer cartridge Slot is bad...
1 - try cleaning the
copper contacts of the both carts and cart slot in the printer and try
again..
or
2 - when error shows up, shut the printers power off;
wait one minute and turn it back on press copy.
It mean your catridges overflow even from brand new catridges after
a several prints or right after you refilled the catridges. Check to
see if ink are smeared on the holder where the contact panel with the
catridge. I have the same problem which I think lexmark have a proble
and overlook.
Solution:
I use the klennex with a few drops of water to dampen
and clean off those contact on the holder and my printer work again.
The
refill ink work very well if you let it sit 24 hrs. Then before you
print anything, you should run aligned the catridges a couple times then
run clean catridges a couple times.
Print the test page to see how
it's look and way you go.
Be sure not to leave any debris of klennex
on those holder contact panel.
Dell Series 5 ink cartridges have a sensor in them that cannot be
reset.
Article on refilling Dell ink cartridges.
Dell Series 5 ink cartridges can be purchased at Staples, Walmart or
Dell's Website.
If you do not have a manual and need a manual juat click
here to download your manual.