20 Most Recent Motorola Mobility H500 Wireless Headset - Page 11 Questions & Answers

it will be 0000 (default)

Try 1234.

press and hold the main button for 3 or so seconds an it wil flash 3 times to indicate that it is active.

The default passkey is "0000". Try that & see! Please update the question & let us know if the information given was useful to you - Good Luck!

There is an online guide, link below: http://www.motorola.com/mdirect/demos/how2_h500/h500.html You can more information on the link below: http://www.motorola.com/consumer/v/index.jsp?ps=y&itemID=5041586a336a0110VgnVCM1000008206b00a____§ionName=SEC_TYP_00012&prodType=-1&vgnextoid=38b5f7c0c1a0b010VgnVCM1000008206b00aRCRD&show=globalSupport&catID=7af81300ec3b0110VgnVCM1000008206b00a____&pg=PG_TYP_00003&productID=e3bbb177d4ecc010VgnVCM1000008206b00aRCRD

try 0000 or 9999...these are the common codes for any bluetooth headset.good luck.

this sound is the sound of count down from going from a standbye mode to shutting off itself to conserve battery thats all this is
cant stop it unfortunatly its built in feature

1. Bluetooth enabled?

Hold down the connect button on headset until steady purple light comes on, then open the boom.

Search for Bluetooth devices on the phone. When asked for a pin, use "0000". Now the H700 will show up in the Bluetooth device list, but it will not connect. Put the headset in pairing mode again, this time go to the h700 listed on the phone and select connect. Now the devices will work as normal. When you open the boom on the h700, it will connect to the phone.

1.Press and hold the Multifunction button in the middle of a boom headset while the headset is closed. The light will glow blue.2.Open the boom microphone and the blue light should remain on. If not, repeat step 1.
3.On the cell phone, press Menu > Settings > Connection > Bluetooth > Handsfree > New Device
4.Select H500 once a connection is detected.
5.The passkey "0000" is now entered to confirm the connection has been made.
6.The cell phone screen will now read "Bluetooth Connection".

Tips:
1.Provided you set the Bluetooth power to "On" after the initial connection has been made, the phone will automatically re-connect to the headset.
2.To set the Bluetooth power on - Press Menu, Select Settings, then Connections, then Bluetooth link, scroll to Setup and select that. Scroll to Power and chose Change. Scroll to On and press Select. The screen should now read "Changed: Power On".
3.Test Your Connection: Close the headset and watch for cell phone to say "Disconnected". Re-open the headset and the phone should be connected automatically and will now display "Bluetooth Connected".

please give good rating if the solution works.
Thanks for using FixYa.

Here is the complete manual from the Motorola website
http://www.motorola.com/Hellomoto/Master%20Lists/Product%20Manuals/Static%20Files/AU-EN/H500_User_Manual.pdf

I had no problems pairing H500 with my BBerry Curve, but I did have download installation instructions to ensure I had the H500 set up correctly- must have continuous blue light before starting to pair. I enable the BBerry Bluetooth and selected find and there it was. Put in passcode 0000 and it connected just fine.

Did you all buy your sets off ebay or some other non-motorola manufacturer.....I know it doesn't seem like it but chances are you have a counterfeit motorola...Most of the ones on eBay or other sites where you buy from people are COUNTERFEIT....there are ways to check. go to motorolas website and type in

counterfeit

theres a PDA file to check if urs is

Ebay I bought 3 for $5.00 for my h500 from preowned phones

Hey guys. found it. Go to
www.simoncells.com
then go to manuals
than click on the H500 Bluetooth.
It will walk you through step by step its pretty easy..


Or, you can do it easier.
- Press and hold the Power/Call buttom for 6-10 seconds, until there is a steady blue light
- when there is a steady blue light, go to your phone's Menu, then click on Bluetooth, than Handsfree, It will then start locating your bluetooth. In about 3-5 seconds it will pop up as H500.
-Connect to H500, or push Yes to Connect. (which ever way your phone tells you)
-It will then ask for a password. ALL PASSWORDS ARE THE SAME;AND CANNOT BE CHANGED.
- YOUR PASSWORD IS 0000. typle that in.

Congratulations! Your Now Connected.!

Good luck guys.
Any questions, im on here usually every other day

Ed

yes please

the pass key is "0000"

i think the pin is 1111

Yes i do, dont know how to fix.

here is a link for the manual download.
http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man
if the website is askin for registration, its a free registration so go for it.then paste the link in your browser.the manual is downloaded in no time,Thank you for contacting us.please do keep posting further queries

0000 or 00000

;)