20 Most Recent Motorola Mobility H700 Wireless Headset - Page 6 Questions & Answers

ok it took me a while the way u need to do this pairing is easy they just explain it really bad.
in your phone find the add device
press the call button till the purple light comes on
open the FLIP(microphone part AND THE EAR PEICE!!! people for get the ear peice)
press ok and have your phone start searching
once it finds the device press 0000 for the pin
your all set i almost sure this will work!!!

The battery is to be replaced.Contact customer support for replacement

On your phone, make sure bluetooth is turned on (settings, general).

While your phone is in discovery mode, turn your bluetooth device on and put it in discovery mode (usually you have to hold the power button for 7-10 seconds).

Your phone will find the device, and you will be prompted to enter the devises PIN number (often 0-0-0-0). Your phone should pair with the device then.

I used a sharp push pin to wedge between the inner and outer halves of the mic. Once you get it started, just keep working around it until it pops off. If you need to remove the mic arm from the headset, squeeze or pry the metal hinge spring clip together to remove, then gently tap to remove plastic bushings that the spring clip retained. Reassemble in reverse order.

0000 (4 zeros)

You should remove this item from the phone and reconnect / pair it again. In the manual for the headset you have information on how to reconnect the headset to the phone and the phone have to be in "discover" mode for bluetooth

Usually 0000 (4 zeros) or 1111

They are not changeable.

Hi there and welcome to FixYa,

The passkey for your motorola H700 is 0000

Thanks and please rate if this helps,
levibit

Because you have to open the mike and close it... then hold the button one the light comes on open the boom immediatly;i Once follow the instructions and prompted for the passkey and entered 0000. If that doesn't work then you have something wrong with your earpiece.

However, you've got to be quick about the whole process (- Start with unit charged, closed, no lights.
- Hold connect button (big one in middle),
- When light (purple) comes on,
- Open microphone boom,
- Start search on your phone.

Check this troubleshooting tips...
1. My headset will not enter pairing mode.
Make sure that any devices previously paired with the headset are turned off. If the indicator light is flashing in blue, turn off the other device and wait for 10 seconds. The indicator light becomes steadily lit in purple indicating the headset is now in pairing mode.

2. My phone doesn't find my headset.
Make sure the indicator light on your headset is on (lit in purple) and steady when your phone is searching for devices (see step 3).

3. My headset worked before but now it's not working.
Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3).

If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/bluetooth and click Support.


Keep us updated.

Open the headset boom: it will flash steadily purple, it it's not paired ever. If it was paired turn that devices off; open the headset boom, blue will steadily lit; after 5 seconds, it will steadily purple lit. Now find Motorola H700 on bluetooth and type password: 0000. Done!

Hi there , to solve this proble since you have the headset over 18 months you need to change the internal battary the life time for these handset battery up to 24 months try to replace it by take it to cellphone shop and im sure you be happy.

It's hardcoded to '0000' (four zeros).
By the way, if your headset's quick start guide happens to be missing, feel free to download it from this location.

Regards, Carlos

If you have already checked the volume on the earpiece, there is probably a short in the wiring somewhere. If it is under or just over a year old contact Motorola about a replacement under the manufacture's warranty. Have a great day.

I have, no-had, two of these H700C. The microphone in both of them failed about when yours did. I had previously split the boom and removed the foam covering the mic due to callers complaining they could not hear me. No solution here as far as I can see, except replacement. I don't understand it, either.

Hi there.

Here is a detailed instructions on how to pair your phone with the headset.

Hello,

As far as I know, both devices don't have any kind of pairing logs. The blackberry as a complex device could have a log stored in it, I know the H700 doesn't have any kind of storage so it doesn't process or keep any logs in it.

Looking around for the logs, few things you can try.

For Pearl, Curve's, and Bold:
From the main menu of the device (where all your applications/folders are displayed), press and hold the "ALT" key, then the letters L G L G

For the Storm:
Hold the device with the BlackBerry logo on top (i.e., in portrait orientation, not landscape orientation, not sideways). On the main device screen where all your application icons/folders are displayed (not while you're within an application), press "MENU" and select "Show Keyboard". Press and hold the "!?123" key (a little lock will show up next to the key) for approximately three seconds, then ",5,5" (comma five comma five) and the log will be displayed.

It's '0000' (four zeros).
By the way, if your headset's quick start guide happens to be missing, feel free to download it from this location.

Regards, Carlos

Check your manual. Mine did that and I had inadvertantly put it on mute. The manual will explain how to unmute it.

I think there are some H700 headsets which support smart find. If this is your case, you must ensure that all the bluetooth enabled devices, which have been previously paired with it, have their bluetooth radios turned off. Then, some 5 seconds after you open the headset's boom, the light should become steadily lit, thus indicating it is in pairing mode. Otherwise (i.e. if it doesn't support smart find), with its boom closed, press the call button for some 5 seconds, until the light is steadily lit. Then, open the boom. Either way, turn on the bluetooth radio of the device you now want to pair your headset with, and make it search for new devices. After a while, the H700 should appear in the device' screen. Select it and make it connect. If a pairing code (or PIN or passkey) is requested, enter '0000' (four zeros).
Hope you are able to sort your problems out.
By the way, if your headset's quick start guide happens to be missing, feel free to download it from this location.

Regards, Carlos

I might be wrong, but I think there are some H700 headsets which support smart find. If this is your case, you must ensure that all the bluetooth enabled devices, which have been previously paired with it, have their bluetooth radios turned off. Then, some 5 seconds after you open the headset's boom, the light should become steadily lit, thus indicating it is in pairing mode. Otherwise (i.e. if it doesn't support smart find), with its boom closed, press the call button for some 5 seconds, until the light is steadily lit. Then, open the boom. Either way, turn on the bluetooth radio of the device you now want to pair your headset with, and make it search for new devices. After a while, the H700 should appear in the device' screen. Select it and make it connect. If a pairing code (or PIN or passkey) is requested, enter '0000' (four zeros).
Hope you are able to sort your problems out.
By the way, if your headset's quick start guide happens to be missing, feel free to download it from this location.
Regards, Carlos
Regards, Carlos