Sharp AR-5316 Advanced Digital Imager Copier - Answered Questions & Fixed issues


That indication is Toner Indication.You should change the toner,Now May be the toner chip also damaged. whether the machine worked after changing the toner then no need to change the toner chip,other wise the same indication still, then you change that one also.

Sharp AR-5316... | Answered on Sep 10, 2019 | 982 views


main motor problem

Sharp AR-5316... | Answered on Sep 02, 2019 | 217 views


Check fixing unit

Sharp AR-5316... | Answered on Jan 17, 2018 | 74 views


Try reset by pressing [#] [interupt] [C] [interupt] [1] [6] [start]

Sharp AR-5316... | Answered on Dec 08, 2017 | 383 views


yes

Sharp AR-5316... | Answered on Nov 17, 2017 | 45 views


sharp ar 5516 showing ( - - - ) what's the solution

Sharp AR-5316... | Answered on Dec 09, 2019 | 12,651 views


Try installing the old driver by right clicking and choosing the run in comparability mode I have had pretty good luck getting these older sharps to run on newer operating systems that way.

I’m happy to help further over the phone at https://www.6ya.com/expert/ethan_e84416e0b13809d2

Sharp AR-5316... | Answered on Apr 08, 2019 | 1,974 views


To reset maintenance codes requires going into service mode. This should only be done by an authorized trained technician as changing or adjusting something in this mode could create all sorts of problems you dont want to deal with.

Sharp AR-5316... | Answered on Jan 02, 2017 | 10,985 views


make sure all the doors are closed & the toner cartridge is fine

Sharp AR-5316... | Answered on Apr 21, 2016 | 33 views


enter sim 14

Sharp AR-5316... | Answered on Apr 21, 2016 | 141 views


CRUM data read trouble
Replace the toner cartridge.
Replace MCU PWB.
Replace MCU PWB EEPROM
Check and fix connection between
CRUM (toner cartridge) and MCU
PWB.

Sharp AR-5316... | Answered on Apr 21, 2016 | 264 views


Check the scanning operation with
SIM 1-1.

Sharp AR-5316... | Answered on Apr 21, 2016 | 49 views


Heat roller abnormally low
temperature

When the temperature does not
reach 155°C within 55 sec after
turning on the power, or when it
falls under 145°C during printing,
or when it falls under 100°C
during pre-heating

Sharp AR-5316... | Answered on Apr 21, 2016 | 29 views


enter sim 14

Sharp AR-5316... | Answered on Apr 21, 2016 | 159 views


enter sim 16

Sharp AR-5316... | Answered on Apr 21, 2016 | 22 views


Replace the toner cartridge.
Replace MCU PWB.
Replace MCU PWB EEPROM
Check and fix connection between
CRUM (toner cartridge) and MCU
PWB.

Sharp AR-5316... | Answered on Apr 21, 2016 | 40 views


CRUM data read trouble

Replace the toner cartridge.
Replace MCU PWB.
Replace MCU PWB EEPROM
Check and fix connection between
CRUM (toner cartridge) and MCU
PWB.

Sharp AR-5316... | Answered on Apr 21, 2016 | 32 views


Mirror base feed trouble
The mirror home position (MHPS)
does not turn off though the feed
operation is completed during
mirror initial operation after turning
on the power.
The mirror home position (MHPS)
does not turn off during shading
operation.
The mirror home position (MHPS)
does not turn on when the mirror
base is returned for the specified
time after copy feed is started and
SPF scanning position shift is
performed.

Sharp AR-5316... | Answered on Apr 21, 2016 | 58 views


Check the scanning operation with
SIM 1-1.

Sharp AR-5316... | Answered on Apr 21, 2016 | 25 views


Thermistor open detected. Thermistor defect
MCU PWB defect
Fusing section connector contact
failure
Power supply failure
Fusing unit not installed
on
Check the harness and the
connector of the thermistor and
the MCU.
Clear the self diag display with
SIM 14.

Sharp AR-5316... | Answered on Apr 21, 2016 | 71 views

Not finding what you are looking for?
Sharp AR-5316 Advanced Digital Imager Copier Logo

1,371 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

k24674

Level 3 Expert

8081 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...