Sharp AR-5316 Advanced Digital Imager Copier - Page 8 - Answered Questions & Fixed issues
Error F 2 (Blinking mode) appears in Display of Sharp AR5316,
Hello sir; F2 have a sub code, press print key to read the sub code, if the sub code is 04,then it means wrong cartridge,wrong country, you can try to reset it;
1, press "#", "interrupt", "c", "interrupt" keys.
2, enter 14 press start.
3, if it work, don't forget give me a good rating.
3/4/2013 11:03:50 AM •
Sharp AR-5316...
•
Answered
on Mar 04, 2013
•
1,414 views
REPLACING THE TONER
HI! I HAVE BOUGHT THE SHARP PRINTER/COPIER/FAX/SCAN MODEL AR-M155, WHEN I INSERTED THE NEW TONNER AND MAKE THE PHOTOCOPY TESTING I GOT THE OUTPUT COPY WHICH SHOWS THE HALFED COPY IN VERTICAL ON RIGHT HAND SIDE WHEN YOU READ THAT PAPER SO WHAT COULD BE THE PROBLEM ON IT WHILE IT IS NEW MACHINE???? AM SCARED!!!. PLEASE IWOULD BE VERY HAPPY IF YOU HELP ME TO SOLVE THIS MY REQUEST PROBLEM.
THANKS,
Aggrey34
Sharp 5316 f2 problem
F2 If sub code is 02 that s toner supply problem .if sub code is 04 that is identification problem model error or data abnormality.do not forget to rate the solution.by MIAN JEE
2/10/2013 9:06:00 PM •
Sharp AR-5316...
•
Answered
on Feb 10, 2013
•
1,880 views
SHARP AR-M201 system error (E7-11)
E7-11 is a white level shading correction error. This code was intended to identify a dirty white level reference (located under the left edge of the copyboard glass).This code has plagued certain individual Cougar machines. I have personally replaced CCD's, installed a foam damper to the top of the hard drive (to damp vibrations between the hard drive and the lens cover), and ICU boards, to no effect. Typically 3 to 7 times a day this code can pop up.
F2
Hi i think the problem code for f2 problem is to enter this code pressing * interrupt CA interrupt then the light will go of then you enter 80 then press copy and 1 copy.
F2 error code
You have used wrong toner cartridge....please use this model AR 202T
1 black line at the end of paper
if u take copy from adf scanner then clean the scanner glass. if the line is coming on print & copy both then check drum is there any line
H2 error
An H2 is an indicator that the temperature sensing device is reading open, preventing the machine to warm up. There is only one way to correct this and that is to replace the thermistor, and that takes a technician. Not a hard job but a novice could get into trouble and make matters worse.
Aloha,
Bill Monroe
6/2/2013 10:28:43 AM •
Sharp AR-5316...
•
Answered
on Jun 02, 2013
•
1,778 views
Not finding what you are looking for?