20 Most Recent Kenmore Elite HE4 Electric Dryer - Page 11 Questions & Answers

check the adjustment of the door micro switch . When the door is closed see if moving the door or pushing on the door hinge activates the dryer.

Sounds like something is stuck in the fan. There is a squirrel cage fan that draws air through the drum. Take the front panel off and you should be able to see the fan. Or look in the lint trap slot with a light and see if you can see anything. I have also see the fans fail and come loose from the shaft.

these newer dryers are such garbage with their thin Sheet metal. see if the door is bent by the hinges. Dropping clothes on the doors bend these newer machines. then they don't seat correctly

check the water pressure switch

does the cord only have the three prongs or should there be a copper cord also

I have this same problem. The Sears Service Technician just left and said that my main panel needs replaced to a cost of $532.88! Needless to say I will be buying another dryer and it will not be a Kenmore....

don't know if you fixed your dryer problem yet.if it worked fine at your old place and now you're having problems at the new house how did you vent the dryer outside?if you hooked your dryer onto a vent line that was there the line could be blocked with lint and popped either the thermal fuse or the high linit thermostat or it's just coincidence that you have a problem right after the move.if you still need help with this let me know and i'll be happy to help you,if you open the door and look around the opening you'll see a tag with the model number,if you send this i can look up your dryer to see what parts are in it.thanks

Rathen than looking for fuses, it sounds more like your heating element is burned out.

you need to clean out the dryer vent hole and the wall vent hole,that is your problem it's not letting the wet hot air out-mike