20 Most Recent
Sony PlayStation 2 Slimline Console - Page 9 Questions & Answers
My ps2 won't play ps2
I have ps2 too. Your games are not original and you don`t have chip. If it isn`t problem i don`tt know what is.
With my ps2 only some
It sounds like the laser unit is faulty. Replacement lasers can be bought from ebay and other web sites. It is fairly easy to replace but you will probably need a soldering iron as there is usually a blob of solder which has to be removed from the new laser unit for the laser to work.
The disc wont read or spin
You must disassemble your ps2 (if you know how, otherwise look it up on youtube) and make sure the laser itself works in the first place. If it doesn't you may need to replace the disc drive which can be a real pain in the ***. Just be glad it's not an xbox i guess XD (i own xbox -_- ****...)
I have a PS2 slim
Do you know anyone else with a PS2 that you could try it on? You need to know if it is the game or PS2.
It could have been that the disc has faded due to storage or being left on a windowsill and this can be hard to notice.
Ps2 slim disk wont spin
and it doesnt read
yes you have a bad laser pick up censor . now you can try to clean the laser by open the unit or buy the laser (pick up censor) and replace i have fix many of this unit and by cleaning never work tha price on the part $50 to take it to a repair shop may be to fix it $90
My playstation2slim light turns green
- DEAR FRIEND, YOU WILL HAVE TO UNSCREW YOUR CONSOLE TO THE MOTHER BOARD.
- FLIP THE MOTHER BOARD,
- READ ALL THE FUSE IN THE GAME TO SEE IF ANY ONE IS CUT
- REPLACE IT AND TEST IT.
My ps3 cant restore the default settings. I have
Unfortunately, your HARD DRIVE (aka: Hard Disk),
located on the left side of the unit, has crashed. You will need to
replace the HD.
When you replace your hard drive, you
will need to have the latest firmware on a usb stick. Download the firmware from
the playstation official website onto a usb stick. Once prompted by your system you
will need to insert the usb stick into the PS3. Good luck..
You will need 2.5" Sata Hard
Drive.
When i turn on my
you may need a new laser. the clicking noise is it moving back and forth trying to read the disc, it'll go the end and skip a few times come back and repeat the process until its satisfied that it cant read the disc. replace the laser and you should fix the problem.
I put in a new
Hi,
The problem could be due to only one reasons.
Check the socket connection to the board is correct.
Do continuity testing on the board and check for the reading.
If the System shows a message "Disc Read Errors" or disc appears damaged or dirty on the screen,
Please do rate the solution if the issue is resolved or post a comment for further assistance.
Thank you for using fixya have a nice day:-)
Not finding what you are looking for?