Jura Capresso Impressa E9 Espresso Machine & Coffee Maker - Answered Questions & Fixed issues

I think water dropped into electric parts and now something burn out...no suggest, just send them the coffe maker

That would normally mean that the brewing mechanism is not in the at rest or start of cycle position. Take the bin off the tray and see if you can slip the bottom tray back in now. Turn the machine on, let it run through the start up process and when completely stopped see if you can now remove tray and fit the spent grounds bin back where it should be.

Hi, I made a video how to fix your Jura step by step, good luck! http://fixandparts.wix.com/nicknicoloudis#!jura-coffee-machine/c15gy

Hi, a video how to fix your Jura step by step, good luck... http://fixandparts.wix.com/nicknicoloudis#!jura-coffee-machine/c15gy

Hi, I made a video how to fix your Jura step by step, good luck... http://fixandparts.wix.com/nicknicoloudis#!jura-coffee-machine/c15gy

Jura are a top brand and offer service and repair on their machines. Ask your local Jura dealer for a repair estimate.

It's not pumping water or making any kind of noise and i am not getting a drip of coffee at all ! please help

It seems that your grinder is clogged. try opening the lid for preground coffee. With a torchlight you will be able to see the outlet from the grinder. Clean out all the coffee that`s stuck there. It`s smart to have a small brush with an angle to do this, and then vacuum it all out.
Also, check your adjustment on the grinder, it shouldn`t be to fine, this could clogg the grinder again.

If this doesn`t help, you need to contact your local servicecenter.

This is most likely due to a bad o'ring. The bar you speak of...Does the unit have a small spout pointing upward from the area?...with a groove? Is the o'ring in that groove damaged or missing? When the grounds are compressed in the piston, the brew unit lowers down onto this spout and seals on it. The high pressure water then is injected upward inot the brew unit. When this seal fails the water simply leaks into the tray when there are grounds providing backpressure. When rinsing and no backpressure some of the water may be getting through. Make sure you lube up any seals with a food grade lube. Olive oil will work in a pinch.

Mike

Your spout is probly cracked (a common problem). It won't hurt the machine if you want to live with making one cup at a time to catch it all.
If you want to get it repaired go to www.hotncold.com Click on Jura Repair for shipping instructions. We can turn the job around in 24 hours. The repair will also include a free software update.

You can find the Jura manuals here:
http://www.capresso.com/customer-care-instruction-booklets.shtml

You need a new drainage valve on the base of the brew unit.

http://www.coffeemaker-spareparts.com/download/instructions_for_seal_replacement_Jura_EF_series.pdfHere is all you need to know

Use a pin or a needle on the spout to clean the nozzle head. Most of the time this is due to useing to fine a grind in the machine. You may have to clean the head this way more then one time to get it to start working again properly.If you have any further questions message me back. Thank you Rick

t is most likely the coffe you are using,I would suggest you try different roast from different brands until you find what you like..for axemple Lavazza coffe from Italy has all kind of different roast.
good luck

Hi.have the unit restarted to its default.

Have you tried using a different brand of coffee? One that provides smaller beans?

Unplug the power cord, 10 seconds before plugging in again and turn on the device again. If the first did not work.. do it again..... this seems to be the very first option to clear the error.

Here are some remedies that might actually clear the errors cause these are the reasons:
1. Look inside your device by removing the chrome cover plate of the shelf (using a philip screw driver), where cups are laying.. Examine carefully if the Prestor part is unable to carry out its function properly. Remove anything that blocks it. residue and particles of grind coffee. You can use a vacuum to **** it.
2. Error 8 was a wedge set part of the prestor had pushed outward the flexible. Try removing the drip tray and unplug your device wait for 10 seconds before plugging it again and turn on the device. After that return back the drip tray.

After you tried these tricks go on the first option again.

Hope that helps.
Alp

We have here the istructions for your problem<br /> <a href="http://www.fixya.com/support/r5713182-jura_capresso_impressa_f9_malfunction_8">http://www.fixya.com/support/r5713182-jura_capresso_impressa_f9_malfunction_8</a><br /> <br /> Thank you for using FIXya

You can find some detail procedure in this tip below
http://www.fixya.com/support/r5713182-jura_capresso_impressa_f9_malfunction_8
Try it since it have help some other with same problem.