20 Most Recent Sony BRAVIA KDL-V32XBR1 32 in. LCD HDTV - Page 4 Questions & Answers

You have to press the hd zoom# or format or wide (or etc.) button on your cable tv or satellite tv remote. If that isn't doing anything then you might have your cable box or satellite tv receiver set on the wrong resolution for your television. Your television's remote might also have a wide or format button on it that needs to be pressed. Also make sure your television is on the right input.

MY SONY BRAVIA KLV-S32A TURNS ON THEN OFF AGAIN .
THE RED LIGHT BLINKS 4 TIMES . WHAT IS THE PROBLEM PLEASE.??

Press MTS/SAP on the remote (under the number buttons) to go between the 3 options of STEREO or MONO or AUTO SAP. Not all channels will have SAP (secondary audio program). Selecting stereo should eliminate any secondary audio.

Normally all one has to do is use a 15pin VGA lead to connect the laptop to the TV socket, select PC on the TV and that should be that. There may be problems if your laptop in a MAC and if the resolutions do not match.

Processor could have some garbage in it, leave set unplug from the wall for 40Min, and it should reset back to normal.

using the remote (for Sony) press menu/tv settings and scroll thru zoom, zoom2, wide,panaramic and stretch... now also using the remote for the cable or dish go to settings and change the viewing too

please note with this digital broadcasting all channels may or may not be full (for example the NBA pass )

No. I don't believe there are any that have the antenna built in, simply because the antenna must usually be placed high up and away from other electronics to be truly effetive. Also, you would need to change the direction of the antenna to achieve the best quality of picture. HDTV antenna can be acquired fairly cheap these days. All you need to do is make sure the tv has a (most likely coaxial) connection for an external antenna.

Hello,

If new batteries did not fix the problem, then it means the problem is either from the remote or the TV.

Remote: Check the remote battery terminal, see if its not rust. Also, disassemble the remote, can check the connection between the terminal and the remote board, see if there is no disconnection of any kind.

If after checking and all seems well, then it means the remote is defective. To confirm, borrow a remote, test it with the TV. If it works, then it means you need to replace your remote. But if the remote you borrowed does not work, then it means the problem is from the TV and not the remote.

TV: There is a sensor in the TV that communicates with the remote. If this sensor is defective, the remote won't communicate with the TV.

The TV sensor might have loosed contact from inside of the TV or it maybe defective and need to be replaced.

So do the above troubleshooting and let me know if the problem is from the TV or remote. If problem is from the remote, you need to do a replacement. But if otherwise, let me knows as well.

Good luck.

This is likely to be a power supply problem. May be bad capacitors.

White patches are usually an indication that something hit the screen. You will need to take it to an authorized service center and have them check it out. It's a pressure spot in the LCD caused by compression of one or more layers of the glass, which changes the way light comes through the screen. Most frequently caused by something hitting the screen. All you can do is replace the LCD screen. I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Either the sensor in the lower left of the set is blocked, dirty or it has failed. The remote for the set can also be checked at a place like radio shack or the dealer you purchased it from/ It is possible that that remote quit and the new on is not recognized by the tv. If you have another Sony tv you can try the remote on that and see if it turns off and on with the old remote, I believe most sony remotes at least work on the off and on function.

try pressing the input or source button on the remote

dear user,

their is a supply problem in your lcd. capacitor are weak .kindly change the main supply capacitor.

i will recommend u to buy KLV-32E400..

LCD SCREEN HAS TO BE REPLACED YOU CANT FIX IT ONCE IT CRACK

I would suspect the T-CON board, you can try reseating the two flat ribbon cables between the T-CON board and the LCD panel to see if the pworblem goes away first.
Boards: http://www.shopjimmy.com/catalogsearch/result/index/?q=Sony+KDL-V32XBR1&limit=25

If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on: Basic troubleshooting guide here: http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting http://www.fixya.com/support/r7406380-tv_training_manuals Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm/ Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague Parts: www.shopjimmy.com Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps. Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series. Please leave rating if it helps.

change your tv mainboard

The tv Tuner signal board is dying and the causes.That the board,where all the output devices and the incomming broadcasting signal cable plug in.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish tv Tuner signal board for the replacement.

YOU NEED TO RESOLDER SOME RESISTORS THAT BECOME LOOSE WITH THE TVS TEMPERATURE... YOU CAN GET A MANUAL TO DO IT YOUR SELF.. AT TVPARTSANDMANUALS ONLINE