Sony BRAVIA KDL-32S2000 32 in. LCD HDTV - Answered Questions & Fixed issues


The finger below is pointing to the HDMI ports.
hqdefault.jpgIf your TV doesn't have these ports then you don't have the ports available.

Sony BRAVIA... | Answered on Jan 29, 2018 | 61 views


There is no way to really check a T con without a lot of test equipment, only thing that is serviceable on that board is the small fuse that is by the LVDS connector...

Sony BRAVIA... | Answered on Dec 19, 2017 | 435 views


THREE Blinks
B+ over voltage protection (OVP), unit goes to the standby
mode then displays the 3 blink fault. This is also a problem in the power
supply circuit, check T603 and R672.
FIVE Blinks
AKB circuit (AKB), the timer/standby indicator blinks for about
30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. Also unit be in IK blanking,
try turning up screen slightly.

Sony BRAVIA... | Answered on Jun 19, 2017 | 66 views


The power supply is failing.

Sony BRAVIA... | Answered on Apr 17, 2017 | 2,058 views


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary. .

Sony BRAVIA... | Answered on Mar 28, 2017 | 1,197 views


Probably in the menu settings if there isn't one on the remote

Sony BRAVIA... | Answered on Jul 30, 2016 | 42 views


If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
Line faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.
Search the site by type in the "brand name" to your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts

Sony BRAVIA... | Answered on Jul 17, 2016 | 40 views


It cannot install.you only need a flash disk and load it with the fimware and nothing else inside.

Sony BRAVIA... | Answered on May 05, 2016 | 43 views


Crack open your power supply again and take a look to make sure all caps are intact and not blown or bulging. Next check the main board for any possible caps and resistors, not likely as there is an external ps but possible. If you don't see anything odd then there may be an issue with the controller chip in which case you could replace but it would probably work out to the same price as buyin a new tv

Sony BRAVIA... | Answered on Oct 01, 2016 | 56 views


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
Firmware (Software) update procedure to many popular brand TVs and other devices are given in detail.

Sony BRAVIA... | Answered on Mar 01, 2016 | 634 views


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls.

Sony BRAVIA... | Answered on Jan 02, 2016 | 55 views


If you have dropped some food crumbs in there or dryed up coffee??...it might have stopped pressing on the PCB board..
open the case carefully with screw driver....
you may have to break a glue bond to...
clean the insides carefully and put back together.

Sony BRAVIA... | Answered on Sep 10, 2015 | 51 views


I plugged this code in and it worked:

10000

Good Luck

Sony BRAVIA... | Answered on Sep 03, 2015 | 29,602 views


Two possibilities.
  1. The corrupted Firmware.
  2. Main system control IC fault.
Remedy
  • Firmware update
  • Replace the main system control memory IC.
http://electronicshelponline.blogspot.com/

Sony BRAVIA... | Answered on Jun 23, 2015 | 102 views


If you wish to get some details; visit the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Type in the brand name of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.
Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Sony BRAVIA... | Answered on Jun 06, 2015 | 77 views


Flickering can be adjusted. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Sony BRAVIA... | Answered on Apr 26, 2015 | 47 views


Hi Edison
In past years the Television used Analog components throughout the TV internals. There was RGB Circuitry (Red Green Blue) and all sorts of things that could be adjusted (and go wrong). Thats not the case any more. It's all digital just like your computer and memory. So... lots of high density IC's (chips) and not much to fiddle with or adjust. The HD Display reflects what is stored in the computer video memory. All Large Scale Integrated Circuits.
There are ribbon cables & connectors that get loose or bad connections and then there are the electrolytic capacitors that leak or chemically break down. So unless you are an electronics guy & know something about components there isn't a lot you can do.
Reset the Bravia box. Power Off / On Etc.
Check the connections on the back. Perhaps a loose HDMI connector if the signal is coming in from another source. Unlikely though. Try bumping the TV from different angles or a slap on the back. If there is a bad internal connection then the colour may return in an instant. This would be an immediate clue to the cause.
If all this fails to make a difference... Then it's probably a chip failure from something like internal overheating. Take it to a dealer or technician (cheaper) rather than have them come to you. They have better facilities in the workshop and they will need to open it up. In most cases they will not fix to component level any more. They will just replace the motherboard or whatever with a factory replacement.
Hopefully repair is covered by Warranty or Insurance.

Cheers

Sony BRAVIA... | Answered on Mar 04, 2015 | 220 views


Contact any service technician or the authorized service center for Sony. http://electronicshelponline.blogspot.com/

Sony BRAVIA... | Answered on Feb 14, 2015 | 60 views


You will find the user guides in different languages by clicking here.

Sony BRAVIA... | Answered on Jan 12, 2015 | 980 views

Not finding what you are looking for?
Sony BRAVIA KDL-32S2000 32 in. LCD HDTV Logo

370 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...