20 Most Recent Sony BRAVIA KLV-40U100M 40 in. HD-Ready LCD Television - Page 9 Questions & Answers

If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/

Return it to the store for a replacement before your warranty expires. There isn't any setting that would correct that kind of noise problem.

T'Con board fault. If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size. Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Check the video How to set up your direct tv box If you wish to get some details; visit the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Both the boards are not equivalent. http://electronicshelponline.blogspot.com/

No... (practically impossible) You cannot just RE-PURPOSE an existing remote!! (technically possible on an UNLIMITED BUDGET) ((w/highly advanced engineering knowledge)) = No. Programmable remotes are quite versatile... but your single purpose remote is PRECISELY THAT... "single purpose" You may indeed want to combine your remotes... but you do have to realize general purpose "programmable" remotes SELDOM provide FULL FUNCTIONALITY. YOU may want to order anther FACTORY REMOTE... or clean the corrosion out of the "not working" one.

Refer its user manual for details. www.retrevo.com/

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary. Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

If the volume works ok on the TGV without remote, replace the remote. But the volume on the TV does not work, replace TV (you could return in warranty or otherwise)

Check the remote control for its infrared emission. Check it with fresh batteries. Check it by pressing all the keys. You can detect the presence of infra-red emission from the remote control, using a cell-phone camera. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. Surf the site with patience. In some cases, the remote control might need to clean. http://remotesearch.blogspot.com/ Search the site by type in this key phrase "how to test a remote control "in the "search box at the top right of the display window of the Homepage" to get the related post quickly. https://www.youtube.com/watch?v=jsSCNCW3IbQ [open and clean] https://www.youtube.com/watch?v=Qp-l1uh-5gE [open and clean] https://youtu.be/wUpnETSm6_k

The tcon bard or the LCD panel is faulty. Can confirm by replacing the TCON board. If you wish to get some details; check the site linked here. Pull up older posts http://electro-medical.blogspot.com/

http://www.sony-asia.com/microsite/bravia_connectivityguide/soundbar/index.html I don't think blue tooth is an option.

Based on the information you have provided for your model and the issue you are currently having with the red light flashing 4 times, we would like for you to try the steps available below:

1. Unplug the television power cord from the electrical outlet.
2. Disconnect all devices from the TV.
3. Let the television remain without power for 2 minutes.
4. Plug the power cord back into the electrical outlet.*
5. Turn your television on.

* If the television is plugged into a power strip or surge protector, remove it from the power strip or surge protector and plug it directly into the wall outlet. If the issue is resolved, the problem is with the power strip or surge protector and not the television. Copied from someone else's post. I agree with the steps this person posted. If this does not work call the manufacturer. You could see how much it would be to fix vs. the cost of buying a new one.

How old is the LED TV Shaaz? It could be going bad

Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

HI its Balancer error please change Balancer board