20 Most Recent Philips Magnavox 15MF400T 15 in. LCD Television - Page 6 Questions & Answers

try going into menu. find parental control and turn it off

IT IS YOUR POWER SOURCE HAD SAME PROBLEM CHANGED POWER PLUG HAS HOT TURNED OFF SINCE

There is a lamp on this unit change it. they are generally in a door on the side of the TV,"note" once U changed the lamp the door must be put back on to operate.

My TV remote has a slide-switch at the side to switch between the TV, DVD or VCR. I don't know if yours has one, if so, switch it to TV. It also has a button to switch between Analogue, Digital and External, so make sure if you have a button like this that it's switched to the right input.

the scart socket on back of the tv might be broke in some way happened to mine

Linux and UNIX wget command help --dns-cache=off, Turn off caching of DNS lookups. Normally, Wget remembers the addresses it looked up from DNS so it doesn't have to repeatedly.

Good Luck, Please dont for get to Vote/Thank You.

The TV is in some kind of protection mode, the blinking LED show you an error code.
Try pressing 062596 and then press menu button (do these in quick motion, don't let them to time out while keying)...see what happens
I also heard that this problem appeared with some people because the of the burnt fuse in the TV. To fix that it has to be taken to the tech shop.
And yes I also heard about this issue many times, seems like this TV set is very popular with this kind of problem.

Remove the cover on the back of the tv. Look for swollen or leaking capacitors. They kinda look like batteries. If they are bulging or leaking then that is your problem. You will have to de-solder the old ones off. Then solder the new capacitors onto the circuit board. Capacitors will cost about 20 dollars and installing them isn't that hard to do. It will fix your tv 99% of the time. So it is worth a try!

I'm assuming that you have checked that the sound is not muted. To confirm that a reset to factory settings is the next procedure: Menu - Setup - General - Factory settings. If you don't see/hear any modifications then it's a hardware defect, not something with the settings.
This happens when the tv thinks that the headphones are used. Simple test to confirm that: plug in a pair of speakers and see if you get the sound on them. If you get and the situation doesn't changes when you unplug them then this is a mechanical defect: the small switch inside the headphone jack is faulty and keeps signaling that the headphones are plugged in when they are not.
The only way to fix that is to replace the jack, which involves a very delicate soldering procedure , one that only a good repairman can do - you must call one.

https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote How many would you like?

Genuine PHILIPS NA725UD DVD VCR COMBO Remote ...

eBay https://www.ebay.ca > ... > Remote Controls Genuine PHILIPS NA725UD DVD VCR COMBO Remote DVP3150V/37 ; Quantity. 4 sold. 8 available ; Item Number. 143886913897 ; Compatible Brand. For Philips ; Accurate ... $67.67 · ‎In stock

PHILIPS 996500027557 DVP3150V37, DVP3150V, ...

eBay https://www.ebay.ca > ... > Remote Controls PHILIPS 996500027557 DVP3150V37, DVP3150V, DVP3150 REMOTE CONTROL ; Model. DVP3150V ; Type. Remote Control ; Accurate description. 5.0 ; Reasonable shipping cost. US$59.95

Buy PHILIPS NA725UD -996500027557 DVD/VCR Combo ...

ReplacementRemotes.com https://www.replacementremotes.com > philips > buy-... PHILIPS NA725UD-996500027557 dvd/vcr remote control for DVP3050V, DVP3050V/37, DVP3050V/37B, DVP3050V37, DVP3050V37/VCR, DVP3050V37B, DVP3150V, DVP3150V/37

Best advice here https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote So many codes, good luck with that :>)

3-Digit Codes

• 856
• 734
• 837

4-Digit Codes

• 2113
• 3175
• 0816

5-Digit Codes

• 33279
• 72303
• 32113
• 23175
• 33175
• 42113
• 31957
• 43175

iLive remotes https://www.google.com/search?q=iLive+Sound+Bar+replacement+remote ..

yes i need software upgrade APPLICATION

In order to pair your RMT-D197A remote to your Philips TV, follow these steps: 1. Power on the TV with the remote. 2. Press and hold the Setup button on the remote until the red LED light blinks twice. 3. Input the four-digit code that corresponds to your brand of TV on the remote. This should be found on the enclosed code list. 4. Release the Setup button. If the code is correct, the red LED light will blink twice. 5. Aim the remote at the TV and press the Volume Up button. If the TV responds, the remote is paired correctly.

The code you need to program your Philips TV using the Sony RMT-D197A is: 741

Just to be clear, we are FIXYA, we aren't Philips, we just have a category for handy filing. The software isn't available online, just drivers. You would have to contact Philips direct. https://www.google.com/search?q=Philips+lifeview+software ..

This sounds like a panel issue Sarah, if this is the case the set isn't repairable.

if new return it

The EEPROM has lost it's boot log, replace the main board and the set should work

The ribbon cable is either loose or dirty.There could be a problem with the HDMI connections.

You need the ribbon serial control cable to use the Phillips MCD716 to connect between the DVD player and the power amplifier. https://www.manualslib.com/manual/175139/Philips-Mcd716-12.html?page=11#manual . The power cord plugs into the power amplifier, https://www.manualslib.com/manual/175139/Philips-Mcd716-12.html?page=10#manual. The DVD player won't turn on without the control cable. Since the power amplifier only has a volume control, you can't do anything with the home theater system (change input, set the tuner frequency) without the ribbon cable. I hope this helps. Cindy Wells