Top 20
Sharp Aquos LC-32D40U Television Questions & Answers
I just bought a sharp
There has to be a menu for picture settings affecting contrast and brightness. Just be patient and you will find them.. Or go to sharp web page for manual download.
Dell 32" HD TV flashes black every few minutes
You may want to make sure it's a Yamaha by seeing how the TV displays when connected directly to a cable box or DVD. Also try different HDMI or component inputs to see if it's something in the input connection you're using.
Blank screen w/sound
The circuit board that controls the picture ( under a metal cover) is defective. They aren't expensive and can easily be replaced even by a novice. All you need is a Phillips screw driver to get the back off the TV and to remove the defective board.
How to fix Sharp LC32D40U tv screen after fallen two foot to a carpet floor
If the screen is cracked then it's expensive to replace the screen. You may do better to get a new TV. There are many places on the internet to get replacement screens. If you want to go that route then go to Sharp's website and download the service manual for your model TV. You'll have to disassemble the entire tv to get to the screen.
I have a shard aquos LCD tv. When I turn it on,
When the tv have this problems dose the tv Power and OPC lights indication flashes together?Yes,than the tv main Tuner signal board it is dying and shorting out.Happen to my Sharp Aquos 46' tv many times but it only take about 2 or 3 off/on to get the tv backlight lite and the tv to work.U can do some mechanicals work wright?Like take thing aparts and putting it back togther again?Yes?The tv Tuner signal board that the board where the tv incomming broadcasting cable wire plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole new refurbish tv Tuner signal board for the replacement.
Sharp LC-32D40U purchased 8/2006 has
Hello,
Problem is in either power supply or the Y-Sustain board.
The Y-Sustain is a relatively large board out of which go connections to the side of the display; it's therefore closer to either the left or the right side of the display, has at least one rather large heat sink on it and fat power cables connecting it to the main power supply.
Often there are fuses on that board - one or more. Check those.
if they are blown you can try to replace them, but expect them to blow again - usually the whole board needs to be replaced.
Hoping that this will help to solve the problem....
I get a black rectangle
I do know that on Zenith CRT televisions of the 1990's this will happen and all I did to fix it is to go to the menu and turn the text feature off. This may be true with your Sharp as well.
Dsded
Can you specify your problem by stating it clearly first?
Sharp lc-32d4ou screen blacks out
I do have a work around that I have used on this model for the past3 years. if the sceen goes black. Turn off the tv. Grab the upper left and right hand corners of the tv with your hands. Flex the tv slightly back and forth. then turn it back on. my will usually run for hours after I do this. I do this 4 times a week. I works 100% if the time for me. Sharp lost a customer. good luck.
Sharp LC-32D40U TV. HALF OF SCREEN FADES TO BLACK
Some HD screens have processors that handle the top and bottom of the screen independently; in your case I would suggest either of these chipsets could have failed and also the processor board that integrates and displays the top and bottom screen components.
Make sure that the appropriate video input for your live video screen is not set to an incompatible TV format, nor is it prorgressiv scan?
Not finding what you are looking for?