20 Most Recent
Westinghouse LTV-32w4 32.02 in. LCD HDTV - Page 6 Questions & Answers
My westinghouse flat screen tv - i turn power on
The tv have 1 or 2 long boards call the LCD inverter boards are dead.These 1 or 2 long LCD inverter boards help the LCD screen to have a backlight to produced a picture.Tries websites like Shopjimmy.com,Ebay.com to buy those 1 or 2 long refurbishes LCD inverter boards for the replacement.
Westinghouse 42"lcd dvd player
We got a disk stuck in our Westinghouse also. After aticking toothpicks and butter knifes in there trying to get it out, we were told to unplug the power and plug it back in and try. When we did we could hear the DVD trying to come out. We stuck the butter knife in there and got it to pop up and out. We havent tried to put another one in but when we do we know how to get it out now.
My Westinghouse T.V. went blank but the sound
Hello,
Since you still get the sound it looks like that your inverter board is gone.
Try to check if your Tv works with any external device for example Dvd or blue ray player if it works fine then you know that your tunes is out.
Either way you have to change the main board.
I can provide you more information on what part no you need for your TV, just leave a comment .
Please let me know if you have any further questions or concerns.
Thanks.
Dvd is stuck
try taking a paperclip or something that can hook on to it. for unplug the tv. 1 more thing is you would have to take it apart. thanks...
How to remove dvd drive for Westinghouse LTV-32w4
http://www.retrevo.com/support/Westinghouse-LTV-32w4-HDC-TVs-manual/id/278ci973/t/2/
First you would have to get a service manual, this shows you all you need to know about the unit. Without it, it is very difficult to even remove the case. but once inside, it is basically a simple task, to find the drive, remove the fastenings, and the Cable, obtain an EXACT replacement HDD, and reverse the procedure, it may pay to format the HDD first, FAT32, I believe, although your manual will be more specific.
Display comes on then goes out
Take a flash light to the lcd and see if you see a image if so you backlight just failed you, your looking at $120 for parts and laboro n this dependingo n where you go.
Now if you do not see nothing, no stanby light you probably got a bad power supply $150 parts and labor. See without more details its hard to say and to do that as a FREE service makes it a little harder. So be considerate with you postive feedback and ratings. Btw, I’m available to help over the phone in case u need at
https://www.6ya.com/expert/edwy_1a56970cf1ea4620
Not finding what you are looking for?